Hydraulic hoses with steel braid

Intended for mi-range pressure hydraulic applications, the T111 is frequently used on handling and industrial equipment for pilot and drain lines.
With its dimensions reduced to the standard’s limits, it can accept all hydraulic fittings with ease and rapidity.
It can be produced with a high abrasion resistant outer cover under part N° T112.

T 111 NF EN 853 1SN

MSHA

T111-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black nitrile rubber
Reinforcement : 1 steel braid
Outer cover : abrasion and weather-resistant neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C - peaks to 120°C
Production lengths : variable
Colour : black
Marking : tecalemit flexibles - part N° - NF EN 853 1SN - DN (mm/inch) - wp/ps (bars) - batch N°

Part N° Mod. Inner
diameter
Reinforcement
outer diameter
Outer
diameter
Negative
pressure
Working
pressure
Test
pressure
Burst
pressure
Bend
radius
Weight
    mm Inch mm mm bar bar bar bar mm Kg/m
9937102 3 4,8 3/16” 9,5 11,8 - 0,8 287 574 1148 89 0,17
9936202 4 6,4 1/4” 11,1 13,4 - 0,8 242 483 967 102 0,21
9935202 5 7,9 5/16” 12,7 15,0 - 0,8 237 474 948 114 0,25
9935302 6 9,5 3/8” 15,1 17,4 - 0,8 203 407 814 127 0,34
9934502 8 12,7 1/2” 18,3 20,6 - 0,8 171 342 685 178 0,42
9934602 10 15,9 5/8” 21,4 23,7 - 0,8 142 285 570 203 0,49
9933602 12 19,1 3/4” 25,4 27,7 - 0,8 123 246 493 241 0,64
9933802 16 25,4 1” 33,3 35,6 - 0,8 91 182 364 305 0,97
9932912 20 31,7 1”1/4 40,5 43,5 - 0,6 68 137 274 419 1,26
9931922 24 38,1 1”1/2 46,8 50,6 - 0,6 61 122 244 508 1,59
9931932 32 50,8 2” 60,2 64,0 - 0,6 49 98 196 630 2,22

This hose is designed for applications Oleo-hydraulic which the temperature of the oil can reach 135 ° C continuous, with peaks at 150 ° C.
this hose can be used in an atmosphere at -50 ° C.
The quality of its neoprene outer cover complies with MSHA requirements.

T 113 NF EN 853 1SN

MSHA

T113-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black nitrile rubber
Reinforcement : 1 steel braid
Outer cover : abrasion and weather-resistant CR rubber
Outer finish : wrapped
Temperature : -50°C to +135° C, peaks to 150° C
Production lengths : variable
Colour : blue
Marking : tecalemit flexibles - part N° - NF EN 853 1SN - DN (mm/inch) - high temperature - wp/ps (bars) - batch N°

Part N° Mod. Inner
diameter
Reinforcement
outer diameter
Outer
diameter
Negative
pressure
Working
pressure
Test
pressure
Burst
pressure
Bend
radius
Weight
    mm Inch mm mm bar bar bar bar mm Kg/m
9937107 3 4,8 3/16” 9,5 11,8 - 0,8 287 574 1148 89 0,17
9936203 4 6,4 1/4” 11,1 13,4 - 0,8 242 483 967 102 0,21
9935203 5 7,9 5/16” 12,7 15,0 - 0,8 237 474 948 114 0,25
9935305 6 9,5 3/8” 15,1 17,4 - 0,8 203 407 814 127 0,34
9934505 8 12,7 1/2” 18,3 20,6 - 0,8 171 342 685 178 0,42
9933605 12 19,1 3/4” 25,4 27,7 - 0,8 123 246 493 241 0,64
9933805 16 25,4 1” 33,3 35,6 - 0,8 91 182 364 305 0,97
9932915 20 31,7 1”1/4 40,5 43,5 - 0,6 68 137 274 419 1,26
9931905 24 38,1 1”1/2 46,8 50,6 - 0,6 61 122 244 508 1,59

This hose combines great physical properties, in terms of working pressure and bend radius, with reduced dimensions.
The quality of its neoprene outer cover complies with MSHA requirements.

T 116 SAE 100 R16

MSHA

T116-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : nitrile rubber
Reinforcement : metal braid
Outer cover : neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C - peaks to 125°C
Production lengths : variable
Colour : black
Marking : tecalemit flexibles - part N° - T116 - DN (mm/inch) - wp/ps (bars) - batch N°

Part N° Mod. Inner
diameter
Reinforcement
outer diameter
Outer
diameter
Working
pressure
Test
pressure
Burst
pressure
Bend
radius
Weight
    mm Inch mm mm bar bar bar mm Kg/m
9939116 3 4,8 3/16” 9,7 11,7 350 700 1400 44 0,14
9939216 4 6,4 1/4” 11,2 13,6 453 905 1811 51 0,25
9939316 5 7,9 5/16” 12,5 14,5 412 824 1648 57 0,27
9939416 6 9,5 3/8” 14,6 16,6 282 565 1130 63 0,33
9939516 8 12,7 1/2” 17,6 19,6 338 675 1351 89 0,41
9934516 10 15,9 5/8” 20,6 22,8 262 525 1050 102 0,47
9937716 12 19,1 3/4” 24,4 26,7 225 450 900 121 0,57
9933816 16 25,4 1” 32,5 35,5 157 313 627 152 0,72
9935916 20 31,7 1”1/4 39,6 43,0 100 200 400 210 1,12

Hose type T117 according to SAE 100 R17 is an “isobaric” hose.
The minimum working pressure defined by the standard is 210 bar irrespective of its diameter.
The hose has a 1 steel wire braid reinforcement up to diameter 3/8” and 2 steel wire braids above.
Working pressures are indicated for the hose as such.
The quality of its neoprene outer cover complies with MSHA requirements.

T 117 SAE 100 R17

MSHA

T117-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : nitrile rubber
Reinforcement : metal braid
Outer cover : neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C - peaks to 125°C
Production lengths : variable
Colour : black
Marking : tecalemit flexibles - part N° - T117 - DN (mm/inch) - wp/ps (bars) - batch N°

Part N° Mod. Inner
diameter
Outer
diameter
Working
pressure
Test
pressure
Burst
pressure
Bend
radius
Weight
    mm Inch mm bar bar bar mm Kg/m
9939217 4 6,4 1/4” 12,4 263 526 1053 50 0,18
9939317 5 7,9 5/16” 14,1 275 450 900 55 0,22
9939417 6 9,5 3/8” 16,1 236 471 943 65 0,28
9939517 8 12,7 1/2” 20,3 286 572 1144 90 0,45
9937617 10 15,9 5/8” 24,0 296 591 1183 105 0,59
9937717 12 19,1 3/4” 27,7 243 485 971 125 0,78
9933817 16 25,4 1” 34,6 214 428 856 150 1,14

Produced according to the standard EN 857 1SC, the T121 hose has reduced dimensons and low bend radius.
Requiring care during assembly, it is preferred by OEMs and appreciated for its cost.
Produced on request.
The quality of its neoprene outer cover complies with MSHA requirements.

T 121 NF EN 857 1SC

MSHA

T121-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : nitrile rubber
Reinforcement : metal braid
Outer cover : neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C - peaks to 120°C
Production lengths : variable
Colour : black
Marking : tecalemit flexibles - part N° - T121 - NF EN 857 1SC - DN (mm/inch) - wp/ps (bars) - batch N°

Part N° Mod. Inner
diameter
Reinforcement
outer diameter
Outer
diameter
Working
pressure
Test
pressure
Burst
pressure
Bend
radius
Weight
    mm Inch mm mm bar bar bar mm Kg/m
9936240 4 6,4 1/4” 10,1 13,6 261 522 1045 45 0,20
9935240 5 7,9 5/16” 11,8 14,0 236 472 944 55 0,22
9935340 6 9,5 3/8” 14,0 16,4 212 424 849 60 0,28
9934540 8 12,7 1/2” 17,3 19,5 183 367 734 70 0,34
9934640 10 15,9 5/8” 20,4 22,6 169 338 676 90 0,42
9933640 12 19,0 3/4” 24,0 26,2 111 222 445 100 0,50
9933840 16 25,4 1” 31,2 34,0 95 190 380 160 0,73

Hose type T211, intended to convey hydraulic oil at high pressure, has two metal braids.
Its fine tape wrapped thin outer cover can accept swaging without skiving, using the appropriate ferrules.
Polyvalent and easy to use, it is always readily available throughout our distribution network.
This hose can be produced with a higher abrasion-resistant outer cover under hose N° T212.
The quality of its neoprene outer cover complies with MSHA requirements.

T 211 NF EN 853 2SN

MSHA

T211-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black nitrile rubber
Reinforcement : 2 metal braids
Outer cover : abrasion and weather-resistant neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C - peaks to 120°C
Production lengths : variable
Colour : black
Marking : tecalemit flexibles - part N° - T211- DN (mm/inch) - wp/ps (bars) - batch N°

Part N° Mod. Inner
diameter
Reinforcement
outer diameter
Outer
diameter
Negative
pressure
Working
pressure
Test
pressure
Burst
pressure
Bend
radius
Weight
    mm Inch mm mm bar bar bar bar mm Kg/m
9939109 3 4,8 3/16” 11,1 13,4 - 0,95 463 927 1854 90 0,30
9939209 4 6,4 1/4” 12,7 15,0 - 0,95 454 907 1815 100 0,37
9939309 5 7,9 5/16” 14,3 16,6 - 0,95 379 759 1519 115 0,45
9939409 6 9,5 3/8” 16,7 19,0 - 0,95 365 730 1460 130 0,53
9939509 8 12,7 1/2” 19,8 22,2 - 0,95 304 608 1217 180 0,62
9937609 10 15,9 5/8” 23,0 25,4 - 0,95 270 541 1083 200 0,79
9937709 12 19,1 3/4” 27,0 29,3 - 0,8 219 438 876 240 0,98
9936809 16 25,4 1” 34,9 38,1 - 0,8 173 347 695 300 1,47
9935909 20 31,8 1”1/4 44,5 48,3 - 0,8 133 267 535 420 2,38
9933909 24 38,1 1”1/2 50,8 54,6 - 0,8 96 191 383 500 2,51
9932909 32 50,8 2” 63,5 67,6 - 0,8 88 177 354 630 3,19
9931909 40 63,5 2”1/2   79   69 138 276 760 3,79
9930909 48 76,2 3”   91   50 100 200 900 4,01

This hose is designed for applications Oleo-hydraulic which the temperature of the oil can reach 135 ° C continuous, with peaks at 150 ° C.
this hose can be used in an atmosphere at -50 ° C.
The quality of its neoprene outer cover complies with MSHA requirements.

T 213 HT NF EN 853 2SN

MSHA

T213-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black nitrile rubber
Reinforcement : 2 metal braids
Outer cover : abrasion and weather-resistant neoprene rubber
Outer finish : wrapped
Temperature : -50°C to +135° C, peaks to 150° C
Production lengths : variable
Colour : blue
Marking : tecalemit flexibles - part N° - T211- DN (mm/inch)) - high temperature - wp/ps (bars) - batch N°

Part N° Mod. Inner
diameter
Reinforcement
outer diameter
Outer
diameter
Negative
pressure
Working
pressure
Test
pressure
Burst
pressure
Bend
radius
Weight
    mm Inch mm mm bar bar bar bar mm Kg/m
9939103 3 4,8 3/16” 11,1 13,4 - 0,95 463 927 1854 90 0,30
9939203 4 6,4 1/4” 12,7 15,0 - 0,95 454 907 1815 100 0,37
9939303 5 7,9 5/16” 14,3 16,6 - 0,95 379 759 1519 115 0,45
9939403 6 9,5 3/8” 16,7 19,0 - 0,95 365 730 1460 130 0,53
9939503 8 12,7 1/2” 19,8 22,2 - 0,95 304 608 1217 180 0,62
9937603 10 15,9 5/8” 23,0 25,4 - 0,95 270 541 1083 200 0,79
9937703 12 19,1 3/4” 27,0 29,3 - 0,8 219 438 876 240 0,98
9936803 16 25,4 1” 34,9 38,1 - 0,8 173 347 695 300 1,47
9935903 20 31,8 1”1/4 44,5 48,3 - 0,8 133 267 535 420 2,38
9933903 24 38,1 1”1/2 50,8 54,6 - 0,8 96 191 383 500 2,51
9932903 32 50,8 2” 63,5 67,6 - 0,8 88 177 354 630 3,19

Hose T214 is intended to be used with mid and high pressure hydraulic systems in industrial and agricultural applications.
It is especially resistant to abrasion, oil, fuel and atmospheric agents thanks to its special synthetic rubber coating.
Furthermore, it is very well suited to maritime applications thanks to its sea water resistance.

 

T 214 NF EN 853 2SN

MSHA

T214-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : Special synthetic rubber resistant to hydraulic and mineral oils and lubricants.
Reinforcement : 2 steel braids
Outer cover : Special synthetic rubber resistant to high levels of abrasion, oils, fuels and atmospheric agents.
Outer finish : wrapped
Temperature : - 40°°C to +100°C - peaks to 120°C
Production lengths : variable
Colour : black
Marking : Tecalemit Flexibles - Part N° - NF EN 853 2SN - DN (mm et pouce) - ANTI ABRASIF - N°Lot

Part N° Mod. Inner
diameter
Reinforcement
outer diameter
Outer
diameter
Negative
pressure
Working
pressure
Test
pressure
Burst
pressure
Bend
radius
Weight
    mm Inch mm mm bar bar bar bar mm Kg/m
9939259 4 6,4 1/4” 12,7 15,0 - 0,95 453 907 1815 100 0,37
9939359 5 7,9 5/16” 14,3 16,6 - 0,95 379 759 1519 115 0,45
9939459 6 9,5 3/8” 16,7 19,0 - 0,95 365 730 1460 130 0,53
9939559 8 12,7 1/2” 19,8 22,2 - 0,95 304 608 1217 180 0,62
9937659 10 15,9 5/8” 23,0 25,4 - 0,95 270 541 1083 200 0,79
9937759 12 19,1 3/4” 27,0 29,3 - 0,8 219 438 876 240 0,98
9936859 16 25,4 1” 34,9 38,1 - 0,8 173 347 695 300 1,47

Hose T221 exceeds the requirements of standard NF-EN 857 2SC which sets out the characteristics of so-called “compact” hydraulic hoses.
These hoses are lighter, offer a better bend radius and a greater pressure burst resistance than hydraulic hoses compliant with the previous standard.
Furthermore, the standard version also meets MSHA (Mining and Safety Health Administration) standards. But upon request, it can also be manufactured with a standard neoprene coating or an anti-abrasion coating in reticulated polyethylene.

T 221 NF EN 857 2SC

MSHA

T221-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black nitrile rubber
Reinforcement : 2 steel braids
Outer cover : neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C - peaks to 120°C
Production lengths : variable
Colour : black
Marking : tecalemit flexibles - part N° - NF EN 857 2SC - DN (mm/inch) - wp/ps (bars) - batch N°

Part N° Mod. Inner
diameter
Reinforcement
outer diameter
Outer
diameter
Working
pressure
Test
pressure
Burst
pressure
Bend
radius
Weight
    mm Inch mm mm bar bar bar mm Kg/m
9939240 4 6,4 1/4” 11,4 13,6 450 900 1800 50 0,29
9939340 5 7,9 5/16” 13,0 15,2 384 769 1538 60 0,33
9939440 6 9,5 3/8” 15,2 17,5 357 714 1428 70 0,42
9939540 8 12,7 1/2” 18,7 20,9 310 621 1242 80 0,54
9937640 10 15,9 5/8” 21,9 24,0 276 553 1106 100 0,67
9937740 12 19,0 3/4” 25,8 27,8 236 472 945 140 0,80
9936840 16 25,4 1” 32,8 35,6 181 363 726 180 1,15

Intended for high pressure washing up to 400 bars, this hose is available in two different outer finishes : a very resistant black and a non-marking blue.
In both cases, the outer cover is resistant to animal fats and a wide range of detergents and the thickness of its outer cover is very wear-resistant.

T 261

T261-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black high temperature nitrile rubber
Reinforcement : 2 metal braids
Outer cover : abrasion resistant neoprene rubber
Outer finish : wrapped
Temperature : -30°C to +160°C
Colour : black
Marking : tecalemit flexibles - part N° - lavage 400 bars 160°C - DN (mm/inch) - batch N°

Part N° Mod. Inner
diameter
Reinforcement
outer diameter
Outer
diameter
Working
pressure
Burst
pressure
Bend
radius
Weight
    mm Inch mm bar bar bar mm Kg/m
9935308 5 7,9 5/16” 14,3 17,3 400 1600 114 0,45
9935310 6 10,0 3/8” 16,7 19,7 400 1495 127 0,57

Intended for high pressure washing up to 400 bars, this hose is available in two different outer finishes : a very resistant black and a non-marking blue.
In both cases, the outer cover is resistant to animal fats and a wide range of detergents and the thickness of its outer cover is very wear-resistant.

T263

T263-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black high temperature nitrile rubber
Reinforcement : 2 metal braids
Outer cover : abrasion resistant neoprene rubber
Outer finish : wrapped
Temperature : -30°C to +160°C
Colour : blue
Marking : tecalemit flexibles - part N° - lavage 400 bars 160°C - DN (mm/inch) - batch N°

Part N° Mod. Inner
diameter
Reinforcement
outer diameter
Outer
diameter
Working
pressure
Burst
pressure
Bend
radius
Weight
    mm Inch mm bar bar bar mm Kg/m
9939244 4 6,4 1/4” 12,7 15,7 400 1820 102 0,37
9937244 5 7,9 5/16” 14,3 17,3 400 1600 114 0,45
9939444 6 10,0 3/8” 16,7 19,7 400 1495 127 0,57
9939544 8 12,7 1/2” 19,8 23,1 400 1200 178 0,65

Hose intended for hydraulic oil and greases under mid-range pressures, the T510 has a textile braid, a steel braid and covered by neoprene impregnated cotton braiding increasing its resistance to wear and abrasion.
Its weight, dimensions and bend radius are very low.
It is produced in specific diameters.
It is preferred in specific industrial appplications for these qualities.
It is used with reusable hydraulic fittings and is widely used on handling and lubrication equipment.
With the same specifications but with a neoprene wrapped-effect finish, T511 can be manufactured on request.

T 510 SAE R5

T510-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black nitrile rubber
Reinforcement : textile and metal braids
Outer cover : neoprene rubber impregnated cotton braid
Outer finish : textile braid
Temperature : - 40°C to +100°C - peaks to 125°C
Production lengths : variable
Colour : black
Marking : tecalemit flexibles - part N° - SAE 100 R5 - DN (mm/inch) - batch N°

Part N° Mod. Inner
diameter
Outer
diameter
Working
pressure
Test
pressure
Burst
pressure
Bend
radius
Weight
    mm Inch mm bar bar bar mm Kg/m
9938101 4 4,8 3/16” 13,2 207 414 827 76 0,23
9938201 5 6,4 1/4” 14,8 207 414 827 86 0,26
9937301 6 8 5/16 17,2 155 310 620 102 0,34
9936401 8 10,3 13/32” 19,5 138 276 552 117 0,40
9936501 10 12,7 1/2” 23,4 121 142 483 140 0,51
9935601 12 16 5/8” 27,4 103 206 414 165 0,63
9933701 16 22,2 7/8” 31,4 55 110 221 187 0,69
9932801 20 28,6 1”1/8 38,1 43 86 172 229 0,97
9932901 24 34,9 1”3/8 44,5 34 68 138 267 1,10
9931901 32 46 1”13/16 56,4 24 48 97 337 1,47
9931904 40 60 2”3/8 73,0 24 48 97 610 2,43

T513 can convey hot fluids under mid-range pressures.
It is compatible with hydraulic oils up to a temperature of 135°C with peaks to 150°C and compressed air/oil mixture up to 120°C.
It can be equipped with tecalemit flexibles® original reusable fittings.

T 513 SAE 100 R5

T513-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : synthetic rubber
Reinforcement : textile and metal braids
Outer cover : rubber impregnated textile braid
Outer finish : textile braid
Temperature : - 50°C to +135°C - peaks to 150°C
Production lengths : variable
Colour : blue
Marking : tecalemit flexibles - part N° - SAE 100 R5 - DN (mm/inch) - batch N°

Part N° Mod. Inner
diameter
Outer
diameter
Working
pressure
Test
pressure
Burst
pressure
Bend
radius
Weight
    mm Inch mm bar bar bar mm Kg/m
9938125 4 4,8 3/16” 12,9 207 414 828 75 0,26
9938225 5 6,4 1/4” 14,5 207 414 828 85 0,30
9937325 6 8 5/16 16,8 155 310 620 100 0,37
9936425 8 10,3 13/32” 19,1 138 276 552 115 0,43
9936525 10 12,7 1/2” 22,9 121 242 484 140 0,59
9935625 12 16 5/8” 27,1 103 206 412 165 0,74
9933725 16 22,2 7/8” 30,8 55 110 220 185 0,73
9932825 20 28,6 1”1/8 37,6 43 86 172 230 0,97
9932925 24 34,9 1”3/8 44,5 34 68 136 265 1,21
9931925 32 46 1”13/16 56,4 24 48 96 335 1,47
9931935 40 60 2”3/8 73 24 48 96 610 2,43
9931945 48 76,2 3” 90,5 14 28 56 840 3,23
certication AEO
Logo NF 377
Certifications DREAL
Certification Veritas
Rubber hoses
hydraulic hoses
hydraulic fittings
tubes pneumatiques