Hydraulic hoses with wire spiral

In the field of power transmission by hydraulic oil, T532 can convey Skydrol up to 43 bars.
It can also be used for superheated steam up to 18 bars at 232°C.
It is possible to manufacture the ISO 6134-2B certified hose 533 with an oil-resistant outer cover.
Is structure reinforced by metal spirals gives excellent bend radius.
The EPDM rubber ensures long service life.
It meets ISO 6134-2A standards.

T 532

T532-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black EPDM rubber
Reinforcement : metal spirals
Outer cover : black EPDM rubber
Outer finish : fine tape-wrapped
Temperature : - 40°C to +232°C
Production lengths : 40 metres except dias. 19, 25 and 53 : 60 metres
Colour : black with red lay line
Marking : tecalemit flexibles - part N° - NFT 47263 - DN (mm/inch) - batch N°

Part N° Mod. Inner
diameter
Outer
diameter
Working
pressure
Burst
pressure
Bend
radius
Weight
    mm Inch mm bar bar mm Kg/m
9935313 8 13 1/2” 25 43 175 60 0,6
9935316 10 16 5/8” 29 43 175 70 0,8
9935319 12 19 3/4” 32 43 175 80 0,9
9935325 16 25 1” 38 43 175 100 1,2
9935332 20 32 1”1/4 46 43 175 150 1,5
9935338 24 38 1”1/2 54 43 175 200 1,7
9935350 32 50 2” 68 43 175 250 2,3
9935353   55 2”1/16 71 43 175 250  2,4
9935363 40 65 2”1/2 80 43 175 280 2,8
9935376 48 75 3” 96 43 175 310 5,3
9935377 64 100 4” 124 43 175 400 6,8

Produced on rigid mandrils from 3/4” up, these hoses are vulcanised in a very long autoclave.
This hose is usually intended for power transmission at high pressures.
It is used in industry, shipping and on earth-moving equipment.
Hoses can be supplied equipped with swaged fittings and test certificates.
It meets the NF EN 856 4SP standard.
The quality of its neoprene outer cover complies with MSHA (Mine Safety and Health Administration) requirements.

T 911 NF EN 856 4SP

MSHA

T911-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black synthetic rubber
Reinforcement : 4 steel wire spirals
Outer cover : oil and weather resistant neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C - peaks to 125°C
Production lengths : 61 metres and variable
Colour : black
Marking : tecalemit flexibles - part N° - NF EN 856 4SP - DN (mm/inch) - wp/ps (bars) - batch N°

Part N° Mod. Inner
diameter
Reinforcement
outer diameter
Outer
diameter
Working
pressure
Test
pressure
Burst
pressure
Bend
radius
Weight
    mm Inch mm mm bar bar bar mm Kg/m
9939108 4 6,4 1/4” 14,6 17,9 540 1080 2160 150 0,62
9939308 6 9,5 3/8” 17,5 22,2 501 1002 2004 180 0,85
9939508 8 12,7 1/2” 20,2 25,2 448 896 1792 230 0,95
9939608 10 15,9 5/8” 23,8 28,6 384 769 1538 250 1,14
9939708 12 19,1 3/4” 28,2 32,0 456 911 1823 300 1,48
9939808 16 25,4 1” 35,3 41,0 357 714 1428 340 2,06
9937900 20 31,8 1”1/4 46,0 51,2 305 611 1222 460 3,22
9936900 24 38,1 1”1/2 52,4 58,0 279 559 1118 560 3,74
9936910 32 50,8 2” 65,3 70,4 252 504 1008 660 4,50

Produced on rigid mandrils, these hoses are vulcanised in long length autoclaves.
This hose is usually employed for power transmission at high pressures.
T912 is used in industry, shipping and on earth-moving equipment.
It meets NF EN 856 4SH standards.
The quality of its neoprene outer cover complies with MSHA (Mine Safety and Health Administration) requirements.

T 912 NF EN 856 4SH

MSHA

T912-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black nitrile rubber
Reinforcement : 4 or 6 metal spirals
Outer cover : oil and weather resistant neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C - peaks to 125°C
Production lengths : 61 metres
Colour : black
Marking : tecalemit flexibles - part N° - NF EN 856 4SH - DN (mm/inch) - wp/ps (bars) - batch N°

Part N° Mod. Inner
diameter
Reinforcement
outer diameter
Outer
diameter
Working
pressure
Test
pressure
Burst
pressure
Bend
radius
Weight
    mm Inch mm mm bar bar bar mm Kg/m
9939807 10 15,9 5/8” 23,6 28,4 521 1042 2084 250 1,10
9939809 12 19,1 3/4” 28,4 32,2 456 912 1825 280 1,56
9939810 16 25,4 1” 35,2 38,7 452 903 1807 340 2,09
9939811 20 31,8 1”1/4 41,9 45,5 365 729 1459 460 2,57
9939812 24 38,1 1”1/2 48,8 53,5 361 721 1443 560 3,42
9939813 32 50,8 2” 63,2 68,1 295 589 1179 700 4,73

Produced on rigid mandrils, these hoses are vulcanised in long length autoclaves.
This highly abrasion resistant hose is normally intended for high pressure delivery.
Thanks to its special synthetic rubber outer cover, it is particularly resistant to abrasion, oils, fuels and atmospheric agents.
T914 is used in industry, shipping and on earth-moving equipment. 
It meets NF EN 856 4SH standards.

T 914 NF EN 856 4SH
SUPER ABRA

T914-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black nitrile rubber
Reinforcement : 4 or 6 metal spirals
Recouvrement : Special synthetic rubber outer cover resistant to abrasion, oils, fuels and atmospheric agents.
Outer finish : wrapped
Temperature : - 40°C to +100°C - peaks to 125°C
Production lengths : 61 metres
Colour : black
Marking : tecalemit flexibles - part N° - NF EN 856 4SH - ANTI ABRASIF - DN (mm et pouce) - wp/ps (bars) - N°Lot

Part N° Mod. Inner
diameter
Reinforcement
outer diameter
Outer
diameter
Working
pressure
Test
pressure
Burst
pressure
Bend
radius
Weight
    mm Inch mm mm bar bar bar mm Kg/m
9939849 12 19,1 3/4” 28,4 32,2 456 912 1825 280 1,56
9939850 16 25,4 1” 35,2 38,7 452 903 1807 340 2,09
9939851 20 31,8 1”1/4 41,9 45,5 365 729 1459 460 2,57

T915 is among the toughest hydraulic hoses of the range.
I is produced on rigid mandrils and vulcanised in straight lengths.
Its working pressure is 420 bars for all diameters.
Swaging of fittings is carried out after internally and externally skiving the hose.
The metal structure of the hose is then perfectly in cohesion with the metal fitting.
The quality of its neoprene outer cover complies with MSHA (Mine Safety and Health Administration) requirements.

T 915 NF EN 856 R15

MSHA

T915A-tuyau-hydraulique-flexible

T915B-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black nitrile rubber
Reinforcement : 4 high tensile steel spirals up to 1”, 6 high tensile steel spirals from 1”1/4 up
Outer cover : neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +120°C - peaks to 125°C
Production lengths : 61 metres
Colour : black
Marking : tecalemit flexibles - part N° - NF EN 856 R15 - DN (mm/inch) - wp/ps (bars) - batch N°

Part N° Mod. Inner
diameter
Outer
diameter
Working
pressure
Test
pressure
Burst
pressure
Bend
radius
Weight
    mm Inch mm bar bar bar mm Kg/m
9939002 12 19,1 3/4” 32 420 840 1680 265 1,54
9939003 16 25,4 1” 38,4 420 840 1680 330 2,14
9939004 20 31,7 1”1/4 49,3 420 840 1680 445 3,97
9939005 24 38,1 1”1/2 57,3 420 840 1680 530 4,98
9939006 32 50,8 2" 74 420 840 1680 635 7,32

The T 916 hose built on rigid mandrels of 61 meters and vulcanized on straigt lenghts.
It is used for hydraulic systems with high peak pressures and arduous operating conditions, offshore, drilling, minning, industries, etc...
It reachs MSHA requirements (mining safety and health administration) regarding in fire resistance.
Swaging of fittings is carried out after internally and externally skiving the hose.
The metal structure of the hose is then perfectly in cohesion with the metal fitting.

MSHA

T915B-tuyau-hydraulique-flexible

 

Technical specifications :

Inner tube : Synthetic rubber.
Reinforcement : 4 very high tensile steel spiral, 6 seel spiral for the 3".
Outer cover : hydraulic oil, high abrasion and weather resistant synthetic
rubber.
Outer finish : wrapped
Temperature : -40°C to +100°C - peaks to 125°C
Production lengths : 61M
Colour : black
Marking : tecalemit flexibles - part N° - DN (mm/inch) - wp/ps (bars) - batch N°

Part n° Mod. Inner
diameter
Reinforcement
outer diameter
Outer
diameter
Working
pressure
Test
pressure
Min. burst
pressure
Bend
radius
Weight
    mm Inch mm mm bar bar bar mm g/m
9939716 10 16 5/8" 23,8 26 350 700 1400 125 1335
9939816 12 19 3/4" 28,2 31 350 700 1400 140 1960
9939916 16 25,4 1" 35,1 38,4 350 700 1400 150 1960
9938908 48 76,2 3” 93,3 97,3 210 420 900 900 10300

Hose types T961 and T962 are mainly intended for very high pressure waterblasting.
For example, they are used in refineries, sugar mills, paint spray booths in the automotive industry and also for decennial maintenance of engineering works.
Used with water, the safety factor between burst and working pressure is 2.5.
The hose must be internally and externally skived before mounting and swaging of end-fittings.
The metal structure of the hose is then perfectly in cohesion with the metal fitting.

T 961

T961-962-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black synthetic rubber
Reinforcement : textile layers, 4 steel spiral layers
Outer cover : chloroprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C
Production lengths : variable
Colour : black
Marking : tecalemit flexibles - part N° - DN (mm/inch) - batch N°

Part N° Mod. Inner
diameter
Reinforcement
outer diameter
Outer
diameter
Working
pressure
Test
pressure
Burst
pressure
Bend
radius
Weight
    mm Inch mm mm bar bar bar mm Kg/m
9937944 4 6,3 1/4” 14,6 17,6 1000 1250 2500 130 0,595
9938044 6 9,5 3/8” 17,5 21,3 850 1075 2125 155 0,785
9938144 8 12,7 1/2” 20,2 24,6 800 950 1900 200 0,920
9938244 12 19 3/4” 28,2 32 750 925 1850 250 1,930
9938344 16 25,4 1” 35,1 38,4 700 850 1700 300 2,125

Hose types T961 and T962 are mainly intended for very high pressure waterblasting.
For example, they are used in refineries, sugar mills, paint spray booths in the automotive industry and also for decennial maintenance of engineering works.
Used with water, the safety factor between burst and working pressure is 2.5.
The hose must be internally and externally skived before mounting and swaging of end-fittings.
The metal structure of the hose is then perfectly in cohesion with the metal fitting.

T 962

T961-962-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black synthetic rubber
Reinforcement : textile layers, 4 steel spiral layers
Outer cover : chloroprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C
Production lengths : variable
Colour : black
Marking : tecalemit flexibles - part N° - DN (mm/inch) - batch N°

Part N° Mod. Inner
diameter
Reinforcement
outer diameter
Outer
diameter
Working
pressure
Test
pressure
Burst
pressure
Bend
radius
Weight
    mm Inch mm mm bar bar bar mm Kg/m
9938444 6 9,5 3/8” 18 20,4 1250 1580 3125 210 0,875
9938511 8 12,7 1/2” 21,6 24,6 1100 1375 2750 230 1,215
9938644 12 19 3/4” 29 32 1100 1375 2750 250 1,855

Hose type T1362 is mainly intended for very high pressure waterblasting.
For example, it is used in refineries, sugar mills, paint spray booths in the automotive industry and also for decennial maintenance of engineering works.
Used with water, the safety factor between burst and working pressure is 2.5.
The hose must be internally and externally skived before mounting and swaging of end-fittings.
The metal structure of the hose is then perfectly in cohesion with the metal fitting.

T 1362

T1362-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black synthetic rubber
Reinforcement : 6 wire spirals
Outer cover : chloroprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C
Production lengths : variable
Colour : black
Marking : tecalemit flexibles - part N° - DN (mm/inch) - batch N°

Part N° Mod. Inner
diameter
Reinforcement
outer diameter
Outer
diameter
Working
pressure
Test
pressure
Burst
pressure
Bend
radius
Weight
    mm Inch mm mm bar bar bar mm Kg/m
9938744 6 9,5 3/8” 19,6 24 1450 1820 3625 200 1,135
9938844 8 12,7 1/2” 22,3 29 1450 1820 3625 250 1,420
9938944 12 19 3/4” 30,8 34 1350 1690 3375 300 2,140
9939044 16 25,4 1” 38,1 43 900 1150 2300 350 3,210
certication AEO
Logo NF 377
Certifications DREAL
Certification Veritas
Rubber hoses
hydraulic hoses
hydraulic fittings
tubes pneumatiques