Hydrocarbon delivery rubber hoses

Intended for suction and delivery of tar, bitumen and hot petroleum products, hose 401 80/90 is produced in predetermined lengths with flexible cuff-ends.
In Diameter 19, Its reinforcement consists of two metal wire spirals.
Diameter 25 is protected by an external metal spiral.
Diameters 38, 50 and 63 have a smooth outer cover and can be cropped to length.
In diameter 50, a variant exists with an external metal spiral.
The hose structure is protected from heat by a fibreglass interlayer.
The quality of its outer cover affords excellent resistance to ozone and bitumenous products.
It has a low bend radius.
It can be supplied equipped with half-symetrical, threaded or flange fittings along with ADR test certificate.

Ø 19

401 19 tuyau caoutchouc flexible

Ø 25 / Ø 50

401 25 tuyau caoutchouc flexible

Ø 38 / Ø 50 / Ø 63

401 38 tuyau caoutchouc flexible

Ø 80

401 80 tuyau caoutchouc flexible

Technical specifications :

Inner tube : smooth black synthetic rubber
Reinforcement : fibreglass protection, textile plies and metal spiral
Outer cover : abrasion and weather resistant CR / NBR rubber
Outer finish : dias. 19, 38, 50 and 63 : smooth, dias. 80 and 25 : corrugated (external metal protection spiral for dia. 25 and 50)
Temperature : +180°C maximum
Production lengths : 40 metres, dia. 80 : 3, 4, 6 metres, dia.25 : 5, 8, 15 metres
Electrical conductivity : 1 copper braid or external spiral
Colour : black
Marking : Tecalemit - REF 401 - bitume 180°C - PS 10 bar - production date or batch N°
Particularities : oversized cuff-ends (88mm) on dia. 80

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Burst
pressure
Bend
radius
Weight
  mm Inch mm mm bar bar mm kg/m
401 19 19 3/4” 32 6,5 10 40 130 1,00
401 25 25,4 1” 43 8,5 10 40 200 1,30
401 38 38,1 1”1/2 56 9 10 40 260 1,89
401 50 50,8 2” 70 10 10 40 300 2,60
401 63 63,5 2”1/2 81 9 10 40 400 3,00
401 80 C 90 80 3”5/32 103 11,5 10 40 600 4,05

Possible end-fittings : Male threaded, Guillemin
See also Ref 402, Ref 411

The hose 403 is intended for the equipment of the reels of the fuel distribution tankers.
Manufactured in accordance with the EN 1360: 2013 standard, in the lightest possible way, it has a very thin striped rubber coating very resistant to abrasion.
We deliver it fitted with male or female male or female BSPP fittings 1''1/2 in steel and certificates in accordance with Appendix IV-1 of the amended TDG Order of May 29 2009.
The male threaded end is equipped with a bending spring.

403 tuyau caoutchouc flexible

Technical specifications :

Inner tube : black NBR noir rubber conductor
Reinforcement : 2 textile plies
Recouvrement : caoutchouc synthétique
Outer finish : wrapped
Electrical resistance : less than 1 Mega Ω per meter
Temperature : - 30°C to 70°C
Production length: 50, 60 meters
Colour : black
Red tape marking : Tecalemit - 403 - Hydrocarbures - 16 bars
Inlay marking : SEL - 403 35 - EN1360:2013 - Type 1 - 35 mm - 16 Bars - Ω - TRIM/AN - N° Lot

Part n° Inner
diameter
Outer
diameter
Working
pressure
Burst
pressure
Bend
radius
Weight
  mm Pouce mm bar bar mm kg/m
403 32 32 1"1/4 45 16 48 175 1100
403 35 35 1"3/8 48 16 48 175 1100
403 38 38 1"1/2 51 16 48 225 1235
403 40 40 1"9/16 53 16 48 225 1292

Hose 405 is intended for conveying fuels with up to 50% aromatic content (lead-free fuel).
It complies with DIN 73379: 2013 version 1A
Its inner tube is antistatic and is available in coils for automobile garages and builders.

norme

DIN 73379 TYPE 1A

405 tuyau caoutchouc flexible

Technical specifications :
Inner tube : black antistatic nitrile rubber
Reinforcement : textile braid
Outer cover : CR
Outer finish : smooth
Temperature : - 30°C to + 90°C
Production lengths : 50 metres
Colour : black
Marking : Tecalemit - REF 405 - DIN 73379 type 1A - dia. x thickness - NBR/CR - batch N°
Particularity : antistatic

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Burst
pressure
Bend
radius
Weight
  mm mm mm bar bar mm kg/m
405 4,5x10,5 4,5 10,5 3 10 30 45 0,09
405 5x11 5 11 3 10 30 50 0,10
405 6x12 6 12 3 10 30 60 0,10
405 7x13 7 13 3 10 30 70 0,12
405 7,5x13,5 7,5 13,5 3 10 30 70 0,12
405 8x14 8 14 3 10 30 80 0,13
405 9,5x15,5 9,5 15,5 3 10 30 80 0,14
405 12x19 12 19 3,5 10 30 100 0,20
405 17x24 17 24 3,5 10 30 125 0,32

Dimensions reel :
width : 115 mm
ext. diameter : 185 mm
spindle diameter : 45 m

Bobine01

Part n° reel Inner
diameter
Outer
diameter
length Weight
  mm mm m kg/m
405 D5 15 M 5 11 15 1,90
405 D6 15M 6 12 15 1,97
405 D7 10M 7 13 10 1,48
405 D8 10M 8 14 10 1,67
405 D10 10M 9,5 15,3 10 177
405 D10 15M 9,5 15,3 15 1,82
405 D12 8M 12 19 8 1,51

Embous utilisables : Threaded, CB range
See also Ref 407, Ref 406

Hose 406 is intended for conveying fuels with up to 50% aromatic content (lead-free fuel).
Its inner tube is antistatic.
Its hypalon outer cover allows use of this hose in 110°C continuous atmospheres with peaks up to 135°C.
This outer cover also has excellent resistance to aging and ozone effects.

norme

DIN 73379/ E

406 tuyau caoutchouc flexible

Technical specifications :

Inner tube : black antistatic NBR rubber
Reinforcement : textile braid
Outer cover : CSM
Outer finish : smooth
Temperature : - 30°C to + 90°C
Production lengths : 25 or 50 metres
Colour : black
Marking : Tecalemit - REF 406 - DIN 73379 type 2B - dia. x thickness - NBR/CSM - batch N° - month/year
Particularity : antistatic

Part n° Inner
diameterr
Outer
diameter
Wall
thickness
Working
pressure
Burst
pressure
Bend
radius
Weight
  mm mm mm bar bar mm kg/m
406 3,5x9,5 3,5 9,5 3 10 30 45 0.086
406 5x11 5 11 3 10 30 55 0.105
406 5,5x11,5 5,5 11,5 3 10 30 60 0.101
406 6x12 6 12 3 10 30 40 0.118
406 7,5x13,5 7,5 13,5 3 10 30 70 0.138
406 8x15 8 15 3 10 30 80 0.176
406 9x15 9 15 3 10 30 80 0.158
406 10x16 10 16 3 10 30 65 0.172
406 11,5x18,5 11,5 18,5 3.5 10 30 80 0.231
406 13x20 13 20 3.5 10 30 100 0.267

Possible end-fittings : Threaded, CB range
See also Ref 404, Ref 405, Ref 407

Hose REF 411 is intended for suction and delivery of tar, bitumen and hot petroleum products.
The quality of its outer cover affords excellent resistance to ozone and bitumenous products.
It has a low bend radius. it can be swaged with threaded fittings.

411 tuyau caoutchouc flexible

Technical specifications :

Inner tube : black synthetic rubber
Reinforcement : textile plies and metal spiral
Outer cover : abrasion and weather resistant microperforated CR / NBR rubber
Outer finish : wrapped
Temperature : +80°C
Production lengths : 40 metres
Electrical conductivity : 1 copper braid
Colour : black
Marking : Tecalemit - REF 411 - emulsion de bitume 80°C - production date or batch

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Pression
L.N.E
Bend
radius
Weight
  mm Inch mm mm bar bar mm kg/m
411 19 19 3/4" 30 5,5 5 80 50 0,9
411 25 25 1" 36,5 5,5 5 70 60 1,1

Possible end-fittings : Male threaded with male union 1”1/4, male threaded 3/4 with female union 1”1/4

Hose 416 is intended for suction and delivery hydrocarbon whatever aromatic content.
Its exceptional flexibility and its extremely small radius makes it very handy.
Its resistance to vacuum is 0.9 bar.
Accordingly, it is installed on most tankers for delivery of oil at service stations.
It comes equipped with end-fittings (helical barbed tail) and two electrical coils providing the electrical conductivity.
This hose can be swaged with threaded fittings and supplied with ADR test certificate.

norme

EN 13765 TYPE 2

416 tuyau caoutchouc flexible

Technical specifications :

Inner tube : polypropylene film
Renforcement : Multiple polyester films between two helical turns in galvanized steel
Reinforcement : textile PVC coated
Outer finish : smooth with external metal protection spiral
Temperature : - 30° à + 100° c
Production lengths : 30 metres
Colour : black with red stripe
Marking : Tecalemit - 416 - PS bar - (trimester/year) - batch N°

Part n° Inner
diameter
Working
pressure
Burst
pressure
Bend
radius
Weight
  mm Pouce bar bar mm kg/m
416 GGE 14 40 38,1 1”1/2 14 70 105 1,8
416 GGE 14 50 50 2” 14 70 190 2,06
416 GGE 14 65 63,5 2”1/2 14 70 225 2,7
416 GGE 10 65 63,5 2”1/2 10 50 225 2,7
416 GGE 14 75 76,2 3” 14 70 290 3,5
416 GGE 10 75 76,2 3” 10 50 290 3,5
416 GGE 14 100 101,6 4” 14 70 320 5,44
416 GGE 10 100 101,6 4” 10 50 320 5,44
416 GGE 14 150 152 6 14 70 497 11,9
416 GGE 14 200 203 8 14 70 740 21,5
416 GGE 14 250 254 10 14 70 920 25

Possible end-fittings : Guillemin, Camlock, Flanges, b.s.p

Semi-lay flat hose 441 is intended for suction and deliver fuels at a pressure of 10 bar.
It can be used over a wide range of temperatures and its neoprene outer cover ensures excellent resistance to ozone.

441 tuyau caoutchouc flexible

Technical specifications :

Inner tube : black nitrile NBR rubber
Renforcement : textile plies
Outer cover : abrasion and weather resistant neoprene rubber
Electrical conductivity : 1 copper braid
Outer finish : wrapped
Temperature : -40° à +70°c maximum
Production lengths : 40 metres
Colour : black
Marking : Tecalemit - ref 441 - refoulement hydrocarbures 10 bar - batch N°

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Pression
L.N.E
Bend
radius
Weight
  mm Inch mm mm bar bar mm kg/m
441 19 19 3/4 32 6,5 10 30 90 0,53
441 25 25,4 1” 35 4,8 10 30 254 0,60
441 32 32 1”1/4 47 5 10 30 320 0,74
441 38 38 1”1/2 48 5 10 30 380 0,83
441 40 40 1"9/16 56 8 10 30 380 0,9
441 44 44,5 1”3/4 55 5,25 10 30 445 1,0
441 50 50,8 2” 62 5,6 10 30 510 1,23
441 63 63,5 2”1/2 75 5,75 10 30 635 1,60
441 75 76,2 3” 88 5,9 10 30 762 1,89
441 90 90 3”1/2 104 7 10 30 900 2,72
441 100 101,6 4” 116 7,2 10 30 1016 3,19
441 127 127 5” 143 8 10 30 1270 4,32
441 150 152,4 6” 168 7,8 10 30 1524 5,05

Possible end-fittings : Threaded, guillemin, tankwagen, flange, storz

The hose 443 is intended for the equipment of petrol pumps for diesel, biofuels, standard gasoline , ”super” as well as unleaded gasoline.
The 443T version has a textile reinforcement and complies with EN 1360 type 1.
The 443M version has a metal braid and complies with EN 1360 type 3.
The hose is available in different colors and with a conductive tube of
electricity (resistance to the meter less than 1 Ω m).

norme

443 T
EN 1360 Type 1

443 A tuyau caoutchouc flexible

norme

443 M
EN 1360 Type 3

443 T tuyau caoutchouc flexible

Caractéristiques techniques:
- Inner tube : NBR black
- Reinforcement : Textile braid (443T)
Steel braid (443M)
- Outer cover : Oil-resistant and weather-resistant rubber
- Outer finish : Smooth or wrapped
- Temperature : -30°C to +55°C (on request -54°C to +85°C)
- Production lengths : variables
- Colour : black, green, red or blue
- Marquage : TECALEMIT - 443 - EN1360: 2013 - TYPE (1 or 3) - Ω - Ø - WP 16 BARS - (QUARTER / YEAR) - BATCH N°

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Burst
pressure
Bend
radius
Weight
  Inch mm mm bar bar bar mm Kg/m
443T 13 12,7 1/2” 21,5 4,5 16 48 60 0,295
443T 16 16 5/8” 26 5 16 48 80 0,425
443T 19 19 3/4” 29 5 16 48 100 0,475
443T 25 25,4 1” 36,5 5,5 16 48 150 0,69


Part n° Inner
diameter
Outer
diameter
Pression
de service
Working
pressure
Burst
pressure
Bend
radius
Weight
  Inch mm mm bar bar bar mm Kg/m
443M 13 12,7 1/2” 21,5 4,5 16 48 60 0,385
443M 16 16 5/8” 26 5 16 48 80 0,525
443M 19 19 3/4” 29 5 16 48 100 0,595
443M 25 25,4 1” 36,5 5,5 16 48 150 0,86
Possible end-fittings : Threaded

Hose 462 is particularly appreciated by industrial site maintenance services.
It accepts hot glycol water, compressed air, oil and hydrocarbons up to 40% aromatic content.
It has static electricity conductiveness.
Its reinforcement and thickness give it excellent bend radius.

462 tuyau caoutchouc flexible

Technical specifications :

Inner tube : antistatic NBR rubber
Reinforcement : textile braid
Outer cover : CR / SBR rubber
Outer finish : smooth
Temperature : - 30°C to +70°C maximum
Production lengths : 25 or 50 metres
Colour : black
Marking : Tecalemit - part N° - tuyau multiservice/multipurpose hose - antistatic - ps/wp 25/350psi - DN (mm/inch) - batch N°

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Pression
L.N.E
Bend
radius
Weight
  mm Inch mm mm bar bar mm kg/m
462 6x14 6 1/4” 14 4 25 85 20 0.16
462 8x16 8 5/16” 16 4 25 85 25 0.21
462 10x18 10 3/8” 18 4 25 85 30 0.26
462 13x21 13 1/2” 21 4 25 85 45 0.33
462 16x25 16 5/8” 25 4.5 25 85 65 0.40
462 19x29 19 3/4” 29 5 25 85 100 0.55
462 25x35 25 1” 35 5 25 85 180 0.60

Possible end-fittings : Threaded, CB range
See also Ref 461, ref 362, ref 405

This hose is used for the loading and unloading of tankers.
It complies with 1765 type S10 and is usually fitted with circular flanges, as per EN 1759 class 150 or class 300.

norme

EN 1765 TYPE S15

470 tuyau caoutchouc flexible

Technical specifications :

Inner tube : abrasion and weather resistant NBR rubber
Reinforcement : high tensile synthetic textile, steel wire helix and antistatic copper wire.
Outer cover: abrasion,ozone,weather,heat and oil resistant special synthetic rubber.
Outer finish : wrapped
Temperature : -30° to + 82° c maximum
Production lengths  60 metres maximum until 6’’, 40 metres maximum of 8 " and 10 ", 12 metres maximum until 16 "
Colour : black
Marking : Tecalemit - part N°- EN 1765 type S10 - dia. - batch N°

Part n° Inner
diameter
Outer
diameter
Working
pressure
Burst
pressure
Negative
pressure
Bend
radius
Weight
  mm Inch mm mm bar bar mm kg/m
470 50 2’’ 50,8 72 10 40 - 0,92 200 3,5
470 75 3’’ 76,2 100 10 40 - 0,92 400 5,56
470 100 4’’ 101,6 129 10 40 - 0,92 500 7,97
470 125 5’’ 127 162 10 40 - 0,92 650 14,07
470 150 6’’ 152,4 190 10 40 - 0,92 750 17,325
470 200 8’’ 203 243 10 40 - 0,92 950 24,15
470 250 10’’ 254 302 10 40 - 0,92 1200 38,63
470 300 12’’ 305,8 356 10 40 - 0,92 1500 48,5
470 350 14’’ 355,6 408 10 40 - 0,92 2150 60
470 400 16’’ 406 460 10 40 - 0,92 2800 72,5

Possible end-fittings : A brides

This hose is used for the loading and unloading of tankers.
It complies with 1765 type S15 and is usually fitted with circular flanges, as per EN 1759 class 150 or class 300.

norme

EN 1765 TYPE S15

470 tuyau caoutchouc flexible

Technical specifications :

Inner tube : abrasion and weather resistant NBR rubber
Reinforcement : high tensile synthetic textile, steel wire helix and antistatic copper wire.
Outer cover: abrasion,ozone,weather,heat and oil resistant special synthetic rubber.
Outer finish : wrapped
Temperature : -30° to + 82° c maximum
Production lengths :  60 metres maximum until 6’’, 40 metres maximum of 8 " and 10 ", 12 metres maximum until 16 "
Colour : black
Marking : Tecalemit - part N°- EN 1765 type S15 - dia. - batch N°

Part n° Inner
diameter
Outer
diameter
working
pressure
Burst
pressure
Negative
pressure
Bend
radius
Weight
  mm Inch mm mm bar bar mm kg/m
471 50 2’’ 50,8 74 15 60 - 0,92 200 3,9
471 75 3’’ 76,2 104 15 60 - 0,92 400 6,15
471 100 4’’ 101,6 134 15 60 - 0,92 500 9,35
471 125 5’’ 127 162 15 60 - 0,92 650 13,75
471 150 6’’ 152,4 190 15 60 - 0,92 750 17,45
471 200 8’’ 203 245 15 60 - 0,92 950 25,00
471 250 10’’ 254 303 15 60 - 0,92 1200 38,250
471 300 12’’ 305,8 362 15 60 - 0,92 1500 50,75
471 350 14’’ 355,6 416 15 60 - 0,92 2150 65,225
471 400 16’’ 406 479 15 60 - 0,92 2800 82,25

Possible end-fittings : A brides

The 489 hose is especially conceived for the ground refuelling of aircrafts having an aromatic content up to 50 %.
It meets EN 1361 type B standard.

489 tuyau caoutchouc flexible

Technical specifications :

Inner tube: aviation gasolines and jet fuels resistant,conductive nbr rubber.
Reinforcement : high tensile synthetic textile and 2 antistatic copper wire.
Outer cover: abrasion,ozone,weather,heat and oil resistant special synthetic rubber.
Production lengths : 40 & 60m.
Temperature: -30°C à to 65°C.
Electrical conductivity: < = 106 Ω/m.
Outer finish : smooth.
Colour : black.
Marking : Tecalemit - Part N° - EN 1361 type B - Ω -PS 20 Bars - DN (mm/inch) - batch N°.

Part n° Inner
diameter
Outer
diameter
Working
pressure
Test
pressure
Min. burst
pressure
Bend
radius
Weight
  mm Inch mm bar bar bar mm Kg/m
489 19 3/4” 19 29 20 40 80 113 0,522
489 25 1” 25,4 38 20 40 80 150 0,842
489 32 1”1/4 32 45 20 40 80 200 1,003
489 38 1”1/2 38 51 20 40 80 230 1,162
489 50 2” 50,8 65 20 40 80 305 1,699
489 65 2”1/2 63,5 79 20 40 80 390 2,063
489 75 3” 76,2 92 20 40 80 460 2,562
489 100 4” 101,6 120 20 40 80 610 3,734

Intended for suction and discharge of hydrocarbons, hose 491 has 4 textile plies and a metal spiral.
It is a very robust suction hose.
It can be used over a wide range of temperatures and its neoprene outer cover ensures excellent resistance to ozone.
It is used for discharge when a low bend radius is necessary.
This versatile hose, available in many diameters, can be cut to order.
This hose can be built in several variants, with corrugated flat, corrugated or crenellated coating as well as with an operating temperature of -55 ° C to + 80 ° C.

491 tuyau caoutchouc flexible

Technical specifications :

Inner tube : black NBR nitrile rubber
Reinforcement : 4 textile plies and one metal spiral
Outer cover : abrasion and weather resistant neoprene rubber
Electrical conductivity : 1 copper braid
Outer finish : wrapped
Temperature : - 40°C to +70°C maximum
Production lengths : 20 metres
Colour : black
Marking : Tecalemit - REF 491 - aspiration refoulement hydrocarbures 10 bar - production date or batch

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Burst
pressure
Bend
radius
Weight
  mm Inch mm mm bar bar mm kg/m
491 19 19 3/4” 32 6.5 10 80 120 0.9
491 25 25,4 1” 38 6.5 10 70 150 1.0
491 28 28 1"1/8 41 65 10 30 170 1.0
491 30 30 1” 3/16 43 6.5 10 60 190 1.1
491 32 31,8 1” 1/4 45 6.5 10 60 200 1.1
491 35 35 1” 3/8 48 6.5 10 50 220 1.1
491 38 38,1 1” 1/2 52 7 10 50 250 1.2
491 40 40 1” 9/16 54 7 10 40 280 1.3
491 42 42 1” 21/32 56 7 10 40 300 1.3
491 45 45 1”3/4 57 6 10 40 300 1.4
491 50 50,8 2” 64 7 10 40 300 1.7
491 55 55 1"3/16 69 7 10 30 310 1.8
491 60 60 2” 3/8 74 7 10 30 320 2.0
491 65 63,5 2” 1/2 77 7 10 30 540 2.5
491 70 70 2” 3/4 84 7 10 30 570 2.8
491 75 76,2 3” 90 7 10 30 600 2.9
491 80 80 3"5/32 95 7.5 10 30 700 3.2
491 90 90 3” 1/2 104 7 10 30 720 3.6
491 100 101,6 4” 116 7 10 30 800 4.1
491 110 110 4” 11/32 127 8.5 10 30 890 5.3
491 114 114,3 4” 1/2 131 8.5 10 30 940 5.8
491 120 120 4” 23/32 138 9 10 30 980 6.0
491 125 127 5” 145 9 10 30 1100 6.2
491 140 139,7 5” 1/2 158 9 10 30 1250 7.4
491 150 152,4 6” 172 10 10 30 1500 7.7
491 160 160   182 11 10 30 1700 9.0
491 200 203,2 8” 230 14 10 30 2000 12.5

Possible end-fittings : Threaded, guillemin, tankwagen, flange, storz
See also Ref 492

Hose 492 is intended for suction of oil on hydraulic powerpacks.
Economic, it can be used over a wide range of temperatures and its neoprene outer cover ensures excellent resistance to ozone.
It is used for discharge when a low bend radius is necessary.
For diameters 19, 25, 32, 38, 50, 63, 76, 100, it complies with the SAE J517 version 100R4 standard which applies to suction hoses for hydraulic oils.

492 tuyau caoutchouc flexible

Technical specifications :

Inner tube : black nitrile rubber
Reinforcement : 4 textile plies and one metal spiral
Outer cover : abrasion and weather resistant neoprene rubber
Electrical conductivity : 1 copper braid
Outer finish : wrapped
Temperature : - 40°C to +70°C maximum
Production lengths : 40 metres
Colour : black
Marking : Tecalemit - part N° - dia. - batch N°

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Burst
pressure
Bend
radius
Weight
  mm Inch mm mm bar bar mm kg/m
492 19 19 3/4” 29 5.5 5 15 130 0.70
492 25 25 1” 37 6 5 15 180 0.80
492 30 30 1”3/16 41 5.5 5 15 210 0.91
492 32x45 32 1”1/4 44,5 6.25 5 15 230 1.0
492 35 35 1”3/16 46 5.5 5 15 245 1.10
492 38 38 1”1/2 52 7 5 15  270 1.2
492 40 40 1”9/16 51 5.5 5 15 280 1.28
492 42 42 1”21/32 53 5.5 5 15 295 1.32
492 45 45 1”3/4 56 5.5 5 15 315 1.40
492 48 48 - 60 6 5 15 325 1.50
492 50 50,8 2” 63,2 5.5 5 15 350 1.60
492 55 55 - 66 5.5 5 15 380 1.90
492 60 60 2”3/8 72 6 5 15 420 2.30
492 63 63,5 2”1/2 75 6 5 15 450 2.50
492 70 70 2”3/4 82 6 5 15 500 2.80
492 76 76 3” 89 6.5 5 15 550 3.10
492 80 80 3”5/32 93 6.5 5 15 600 3.50
492 90 90 3”1/2 103 6.5 5 15 650 3.90
492 100 101,6 4” 113 6.5 5 15 690 4.30

Possible end-fittings : Threaded
See also Ref 491

The hose 494 is intended for the transfer of hydrocarbons in the off-shore environment when fire resistance is required.
Anti-corrosion steel reinforcement.
Neoprene outer cover ensures excellent resistance to ozone, oils and abrasion.
Flame resistant according to MSHA standard and fire resistant according to ISO15540 & ISO15541:1999 standard (Tests carried out at the 13 bar operating pressure).
In 2016, it was the subject, in diameter 50 and 150, type approval from the Bureau Veritas Marine and Off-shore division for the transfer to 13 bars of water, sea water, hydrocabures, oil and hydraulic oil.

402 tuyau caoutchouc flexible

Technical specifications :
Inner tube : smooth black NBR rubber
Reinforcement : 2 or 4 metal wire spirals
Outer cover : CR flame-extinguishing
Outer finish : fine tape-wrapped
Temperature : -40°C à +70°C
Production lengths : 60m
Colour : black
Marking Tecalemit by SEL - Part N°- Résistant au feu - ISO 15540 - MSHA - Marking

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Burst
pressure
Bend
radius
Weight
  mm Inch mm mm bar bar mm kg/m
494 50 50,8 2 69 9 30 160 225 2,5
494 75 76,2 3 94 9 30 160 380 4,5
494 100 101,6 4 122 10 30 160 510 6,7
494 125 127 5 149 11 30 160 720 8,0
494 150 152,4 6 176 12 30 160 800 10,75

Possible end-fittings : Breakaway, NPT male, Flanges, Todo

Intended for suction and discharge of hydrocarbons, hose 495 has 4 textile plies and a metal spiral.
It is a very robust suction hose.
It can be used over a wide range of temperatures and its neoprene outer cover ensures excellent resistance to ozone.
It is intended for the delivery of oil by truck - tank.
It meets NF EN 1761 type SD (suction and delivery) standard.
this hose can be swaged with guillemin end-fittings and supplied with TMD modificate (29/05/09) test certificate for which we have a flexible type approval.

495 tuyau caoutchouc flexible

Technical specifications :

Inner tube : black nitrile NBR rubber
Reinforcement : 4 textile plies and one metal spiral
Outer cover : abrasion and weather resistant neoprene rubber
Electrical conductivity : 2 copper braid (< 106Ω/m)
Outer finish : wrapped
Temperature : -40°C à +70°C
Production lengths : 40 metres
Colour : black
Marking : Tecalemit - 495 - EN 1761 : 1999 SD (Ø) - PMS10 - Ω/m - CL

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Burst
pressure
Bend
radius
Weight
  mm Inch mm mm bar bar mm kg/m
495 70 70 2” 3/4 84 7 10 48 300 2,8
495 75 75 3” 91 7,5 10 48 350 2,6
495 90 90 3” 1/2 106 8 10 48 400 4,2
495 100 101,6 4” 118 8 10 48 450 5,8
495 120 120 4”3/4 138 11 10 48 650 7,0
495 150 152,4 6” 175 11,5 10 48 750 9,0

Possible end-fittings : Threaded, guillemin, tankwagen, flange, storz

The 496 hoses is especially conceived for the ground refuelling of aircrafts having an aromatic content up to 50 %.
It meets EN 1361 type c standard.

496 tuyau caoutchouc flexible

Technical specifications :

Inner tube: aviation gasolines and jet fuels resistant,conductive NBR rubber.
Reinforcement: high tensile synthetic textile braid.
Outer cover: abrasion, ozone, weather, heat and oil resistant special synthetic rubber.
Production lengths : 40 & 60m.
Temperature: -30°C à to 65°C.
Electrical conductivity: < = 106/m.
Outer finish : smooth.
Colour : black.
Marking : Tecalemit - Part N° - EN 1361 type C - Ω -PS 20 Bars - DN (mm/inch) - batch N°.

Part n° Inner
diameter
Outer
diameter
Working
pressure
Test
pressure
Burst
pressure
Bend
radius
Weight
  mm Inch mm bar bar bar mm Kg/m
496 19 3/4” 19 29 20 40 80 113 0,522
496 25 1” 25,4 38 20 40 80 150 0,840
496 32 1”1/4 32 45 20 40 80 200 1,000
496 38 1”1/2 38 51 20 40 80 230 1,155
496 50 2” 50,8 65 20 40 80 305 1,710
496 65 2”1/2 63,5 79 20 40 80 390 2,070
496 75 3” 76,2 92 20 40 80 460 2,580
496 100 4” 101,6 120 20 40 80 610 3,760

The 489 hose is especially conceived for the ground refuelling of aircrafts having an aromatic content up to 50 %.
It meets EN 1361 type E standard.
This hose can be produced with a thermoplastic spiral

498 tuyau caoutchouc flexible

Technical specifications :

Inner tube: aviation gasolines and jet fuels resistant,conductive NBR rubber.
Reinforcement: high tensile synthetic textile, 2 steel wire helix and 2 antistatic copper wire.
Outer cover: abrasion, ozone, weather, heat and oil resistant special synthetic rubber.
Production lengths: 40 & 60m.
Temperature: -30°C à to 65°C.
Electrical conductivity : < = 106/m.
Outer finish: smooth.
Colour: black.
Marking : Tecalemit - Part N° - EN 1361 type E - Ω -PS 20 Bars - DN (mm/inch) - batch N°.

Part n° Inner
diameter
Outer
diameter
Working
pressure
Test
pressure
Burst
pressure
Negative
pressure
Bend
radius
Weight
  mm Inch mm bar bar bar bar mm Kg/m
498 19 3/4” 19 31 20 40 80 -0,92 85 0,686
498 25 1” 25,4 39 20 40 80 -0,92 115 0,972
498 32 1”1/4 32 46 20 40 80 -0,92 150 1,218
498 38 1”1/2 38 53 20 40 80 -0,92 180 1,592
498 50 2” 50,8 67 20 40 80 -0,92 250 2,320
498 65 2”1/2 63,5 81 20 40 80 -0,92 325 2,860
498 75 3” 76,2 95 20 40 80 -0,92 400 3,701
498 100 4” 101,6 123 20 40 80 -0,92 550 5,166
certication AEO
Logo NF 377
Certifications DREAL
Certification Veritas
Rubber hoses
hydraulic hoses
hydraulic fittings
tubes pneumatiques