Hoses for the marine

Extremely flexible and light, hose M42 is particularly intended for pleasure boats.
It passes easily from engine comparment through bulkheads to exhaust oulet valve.
Yacht racers appreciate its linear mass.
It replies to sae J2006 type R2 (10/2003) standards relative to pleasure boat wet exhausts, which defines burst pressure, admissible elongation, adherence of components, abrasion and aging resistance of the hose, which must resist exhaust gases during 2 minutes without water cooling.


norme

SAE J2006 type R2

 M42 tuyau caoutchouc flexible

Technical specifications :
Inner tube : smooth black SBR rubber
Reinforcement : 1 textile ply and 1 spiral
Outer cover : SBR rubber
Outer finish : wrapped and corrugated
Production lengths : 60 metres - 20 metres from dia. 127
Colour : black
Marking : Tecalemit Flexibles - M42 - DN - special echappement - marine wet exhaust - SAE J2006 - batch N° - date

Part n° Inner
diameter
Outer
diameter
Wall
thickness
working
pressure
Burst
pressure
Bend
radius
Weight
  mm Inch mm mm bar bar mm kg/m
M42 40 40 1”9/16 46 3 - 3 80 0.7
M42 45 45 1”3/4 51 3 - 3 90 0.8
M42 50 50,8 2” 57 3 - 3 100 1.0
M42 54 54 2"1/8 60 3 - 3 110 1.1
M42 55 55   61 3 - 3 110 1.1
M42 60 60 2”3/8 66 3 - 3 120 1.2
M42 63 63,5 2”1/2 70 3 - 3 140 1.3
M42 76 76,2 3” 82 3 - 3 150 1.8
M42 80 80 3”5/32 86 3 - 3 160 1.9
M42 90 90 3”1/2 96 3 - 3 180 2.0
M42 102 101,6 4” 108 3 - 3 200 2.1
M42 104 104   110 3 - 3 210 2.2
M42 114 114 4”1/2 121 3.5 - 3 230 2.4
M42 127 127 5” 135 4 - 3 250 2.9
M42 140 140 5”1/2 148 4 - 3 280 2.9
M42 150 152,4 6" 162 5 - 3 420 3.2
M42 200 203 8" 215 6,5 - 3 600 6,35

See also Ref M 41L

Intended for supply of fuel to marine engines on pleasure craft, hose 407 corresponds to the international standard ISO 7840 type A1.
This rating defines the inner tube’s lowest permeability to fuels according to that standard.
The quality of the outer cover protects the hose from projections within the engine compartment.
Swaged with end-fittings, this hose can be supplied “ready-to-use”.

norme

NF EN ISO 7840

407 tuyau caoutchouc flexible

Technical specifications :
Inner tube : NBR rubber, resistant to hydrocarbons
Reinforcement : textile braid
Outer cover : CR rubber
Outer finish : smooth
Temperature : - 30°C to +70°C maximum
Production lengths : 40 metres
Colour : black
Marking : Tecalemit - NF EN ISO 7840 - type A1 - lot - dia. - 1 mpa - production date - batch N°

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Burst
pressure
Bend
radius
Weight
  mm mm mm bar bar mm kg/m
407 8X16 8 16 4 10 30 70 0.20
407 10X18 10 18 4 10 30 90 0.23
407 13X22 13 22 4.5 10 30 120 0.36
407 16X25 16 25 4.5 10 30 150 0.40
407 19X29 19 29 5 10 30 190 0.48

Possible end-fittings : Male or female threaded
See also Ref 362, ref 441

Designed for the suction and discharge of hydrocarbons, ref 493 has a textile reinforcement and a metal spiral.
It is a very robust suction hose.
It can be used in a wide temperature range and its neoprene outer cover provides excellent resistance to ozone and is fireproof.
it is used in discharge when a small bend radius is necessary.

norme

ISO 7840 TYPE A1

493 tuyau caoutchouc flexible

Technical specifications :
Inner tube : NBR rubber
Reinforcement : 1 textile braidand 1 metal spiral
Outer cover : CR fireproof
Outer finish : wrapped
Temperature : - 40° to + 80° c
Production lengths : 61 metres
Colour : black
Marking : Tecalemit - NF EN ISO 7840 - Type A1 - 1MPA - Remplissage reservoir - 21/8 - production date - batch N°

Part n° Inner
diameter
Outer
diameter
Wall
thickness
working
pressure
Burst
pressure
Bend
radius
Weight
  mm mm mm bar bar mm Kg/m
493 54 54 9,5 64 10 30 320 1,50

Designed specifically for pleasure boats, hose REF 817 has a butyl rubber inner tube which has the best impermeability to gasses in the range of elastomers.
Consequently, it is destined to connect effluent circuits on yachts.
With its smooth finish, it has an excellent bend radius allowing different types of mounting inside confined cockpits.
Its white colour allows easy incorporation into sanitary environments..

817 tuyau caoutchouc flexible

Technical specifications :
Inner tube : white butyl (IIR) rubber
Reinforcement : 2 textile layers and 1 metal spiral
Outer cover : EPDM rubber
Outer finish : smooth wrapped
Temperature : -30°C to +70°C
Production lengths : 20 metres
Colour : white
Marking : TECALEMIT FLEXIBLES BY SEL - REF 81 7- 5 bar – batch N°

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Burst
pressure
Bend
radius
Weight
  mm Inch mm mm bar bar mm kg/m
817 19X29 19 3/4” 29 5 5 15 40 0,6
817 25X35 25 1” 35 5 5 15 50 0,7
817 38X48 38 1”1/2 38 5 5 15 80 1,1
817 50,8X61 50 2” 61 5 5 15 100 1,5

This PVC hose is used for the discharge of wastewater.
It is also appreciated for its excellent flexibility.
The pressures indicated in the table are given at 20 ° C.

900BLANC tuyau caoutchouc flexible

Technical specifications :
Inner tube : flexible PVC
Reinforcement : steel helix
Outer cover : flexible PVC
Outer finish : slightly corrugated
Temperature : - 5°C to +60°C
Production lengths : 30 metres
Colour : white
Marking : none

Part n° Inner
diameter
Negative
pressure
Working
pressure
Burst
pressure
Bend
radius
Weight
  mm Inch mm bar bar mm kg/m
900B 10 10 3/8” -0,9 8 21 20 0.16
900B 12 12 1/2” -0,9 8 21 25 0.18
900B 14 14   -0,9 7 18 30 0.20
900B 16 16 5/8” -0,9 7 18 35 0.22
900B 18 18   -0,9 7 18 40 0.28
900B 20 20   -0,9 6 15 50 0.34
900B 25 25 1” -0,9 6 15 60 0.51
900B 30 30 1” 3/16 -0,9 5 13 70 0.60
900B 32 32 1” 1/4 -0,9 5 13 75 0.65
900B 35 35 1” 3/8 -0,9 4,5 12 80 0.73
900B 38 38 1” 1/2 -0,9 4,5 12 90 0.80
900B 40 40 1” 9/16 -0,9 3,5 9 95 0.87
900B 45 45 1” 3/4 -0,8 3,5 9 105 1.10
900B 51 51 2” -0,8 3,5 9 125 1.20
900B 60 60 2”3/8 -0,7 3 7 135 1.80
900B 65 65 2” 1/2 -0,7 3 7 150 1.95
900B 70 70 2” 3/4 -0,7 3 7 180 2.20
900B 76 76 3” -0,7 3 7 195 2.50
900B 80 80 3”5/32 -0,7 3 7 220 2.70
900B 90 90 3”1/2 -0,6 2,5 6 260 3.00
900B 102 102 4” -0,6 2,5 6 300 3.40
900B 152 152 6” -0,6 2,5 6 460 6.35

MANUCLAIR® braided pvc tubes are comprised of a flexible translucent pvc inner tube (abbreviation of soft polyvinyl chloride), a single braid of white polyester yarn and a flexible PVC coating.
The inner tube is obtained by extrusion.
It is then cooled before passing through a vertical braider and an angle extrusion head which deposits the outer cover.
MANUCLAIR® tubes are :
- Food quality.
- Translucent rendering the conveyed product visible.
- Flexible.
- Resistant to many common products.
Even though they are less flexible, less sturdy and accept lower working temperatures than their rubber counterparts, MANULEF® tubes are universally used for their main qualities : food compatibility, translucent aspect and resistance to many fluids.

MANUCLAIR tuyau caoutchouc flexible

Technical specifications :
Reinforcement : Translucent PVC
Renforcement : 1 textile braid
Outer covert : Translucent PVC
Outer finish : smooth
Temperature : 0° to + 60° c
Production lengths : 25 metres
Marking : Tecalemit flexibles - Manuclair – D.Int. x D. Ext. - PS/WP 20 BARS 23° - batch N° – Alimentaire

Part n° Outer
diameter
Inner
diameter
Wall
thickness
Non-burst
pressure limit 23°C
Working
pressure 23°C
Bend
radius
Weight
  mm mm mm bar bar mm kg/m
11005000 11 6,3 2,4 15 60 45 85
11010000 13 8 2,5 15 60 60 130
11015000 15 10 2,5 15 60 70 160
11025000 18 12,5 2,8 15 60 90 180
11030000 22 16 3 15 60 120 230
11035000 26 19 3,5 15 60 140 320
11040000 33 25 4 15 60 180 450
certication AEO
Logo NF 377
Certifications DREAL
Certification Veritas
Rubber hoses
hydraulic hoses
hydraulic fittings
tubes pneumatiques