Hydrocarbon delivery rubber hoses

Intended for suction and delivery of tar, bitumen and hot petroleum products, hose 401 80/90 is produced in predetermined lengths with flexible cuff-ends.
Diameter 25 is protected by an external metal spiral.
Diameters 38, 50 and 63 have a smooth outer cover and can be cropped to length.
In diameter 50, a variant exists with an external metal spiral.
The hose structure is protected from heat by a fibreglass interlayer.
The quality of its outer cover affords excellent resistance to ozone and bitumenous products.
It has a low bend radius.
It can be supplied equipped with half-symetrical, threaded or flange fittings along with ADR test certificate.

Ø 19

401 19 tuyau caoutchouc flexible

Ø 25 / Ø 50

401 25 tuyau caoutchouc flexible

Ø 38 / Ø 50 / Ø 63

401 38 tuyau caoutchouc flexible

Ø 80

401 80 tuyau caoutchouc flexible

Technical specifications :

Inner tube : smooth black synthetic rubber
Reinforcement : fibreglass protection, textile plies and metal spiral
Outer cover : abrasion and weather resistant CR / NBR rubber
Outer finish : dias. 38, 50 and 63 : smooth, dias. 80 and 25 : corrugated (external metal protection spiral for dia. 25 and 50)
Temperature : +180°C maximum
Production lengths : 40 metres, dia. 80 : 3, 4, 6 metres, dia.25 : 5, 8, 15 metres
Electrical conductivity : 1 copper braid or external spiral
Colour : black
Marking : Tecalemit - REF 401 - bitume 180°C - PS 10 bar - production date or batch N°
Particularities : oversized cuff-ends (88mm) on dia. 80

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Burst
pressure
Bend
radius
Weight
  mm Pouce mm mm bar bar mm kg/m
401 19 19 3/4” 32 6,5 10 40 130 1,00
401 25 25,4 1” 43 8,5 10 40 200 1,30
401 38 38,1 1”1/2 56 9 10 40 260 1,89
401 50 50,8 2” 70 10 10 40 300 2,60
401 63 63,5 2”1/2 81 9 10 40 400 3,00
401 80 C 90 80 3”5/32 103 11,5 10 40 600 4,05

Possible end-fittings : Male threaded, Guillemin
See also Ref 402, Ref 411

Intended for hose reels found on tar spreading machines, hose 402 has excellent bend radius and is very easy to handle.
It does not fear shocks or crushing.
this hose can be swaged with threaded fittings and supplied with ADR test certificate.

402 tuyau caoutchouc flexible

Technical specifications :

Inner tube : smooth black synthetic rubber
Reinforcement : 2 metal wire spirals
Outer cover : abrasion and weather resistant rubber
Outer finish : wrapped
Temperature : +180°C maximum
Production lengths : 40 and 60 metres
Electrical conductivity : via metal spirals
Colour : black
Marking : Tecalemit - REF 402 - bitume 180°C - PS 10 bar - production date or batch N°

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Pression
L.N.E
Bend
radius
Weight
  mm Pouce mm mm bar bar mm kg/m
402 19 19 3/4” 32 6,5 10 40 200 0,75

Possible end-fittings : Male threaded
Voir aussi ref 401, ref 411

Hose 405 is intended for conveying fuels with up to 50% aromatic content (lead-free fuel).
Its inner tube is antistatic.

norme

DIN 73379 / 9

405 tuyau caoutchouc flexible

Technical specifications :

Inner tube : black antistatic nitrile rubber
Reinforcement : textile braid
Outer cover : CR / SBR rubber
Outer finish : smooth
Temperature : - 30°C to + 90°C
Production lengths : 50 metres
Colour : black
Marking : Tecalemit - REF 405 - DIN 73379 type 2A - dia. x thickness - NBR/CR - batch N°
Particularity : antistatic

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Burst
pressure
Bend
radius
Weight
  mm mm mm bar bar mm kg/m
405 3,5x9,5 3,5 9,5 3 10 30 45 0.085
405 5x11 5 11 3 10 30 50 0.105
405 6x12 6 12 3 10 30 60 0.115
405 7x13 7 13 3 10 30 70 0.130
405 8x14 8 14 3 10 30 80 0.145
405 9,5x15,5 9,5 15,5 3 10 30 80 0.155
405 12x19 12 19 3.5 10 30 100 0.20

Embous utilisables : Threaded, CB range
See also Ref 404, Re 407, Ref 406

Hose 406 is intended for conveying fuels with up to 50% aromatic content (lead-free fuel).
Its inner tube is antistatic.
Its hypalon outer cover allows use of this hose in 110°C continuous atmospheres with peaks up to 135°C.
This outer cover also has excellent resistance to aging and ozone effects.

norme

DIN 73379/ E

406 tuyau caoutchouc flexible

Technical specifications :

Inner tube : black antistatic NBR rubber
Reinforcement : textile braid
Outer cover : CSM
Outer finish : smooth
Temperature : - 30°C to + 90°C
Production lengths : 25 or 50 metres
Colour : black
Marking : Tecalemit - REF 406 - DIN 73379 type 2B - dia. x thickness - NBR/CSM - batch N° - month/year
Particularity : antistatic

Part n° Inner
diameterr
Outer
diameter
Wall
thickness
Working
pressure
Burst
pressure
Bend
radius
Weight
  mm mm mm bar bar mm kg/m
406 3,5x9,5 3,5 9,5 3 10 30 45 0.086
406 5x11 5 11 3 10 30 55 0.105
406 5,5x11,5 5,5 11,5 3 10 30 60 0.101
406 6x12 6 12 3 10 30 40 0.118
406 7,5x13,5 7,5 13,5 3 10 30 70 0.138
406 8x15 8 15 3 10 30 80 0.176
406 9x15 9 15 3 10 30 80 0.158
406 10x16 10 16 3 10 30 65 0.172
406 11,5x18,5 11,5 18,5 3.5 10 30 80 0.231
406 13x20 13 20 3.5 10 30 100 0.267

Possible end-fittings : Threaded, CB range
See also Ref 404, Ref 405, Ref 407

Two types of reels are available : Reel type P in black plastic destined for wholesalers for sale by the metre and Reel type C in cardboard, with a shorter length of hose, more destined for end-users.
These reels can carry one of 3 types of fuel hose : hose type 400 in non-reinforced nitrile rubber, hose type 404 in nitrile rubber with external textile braid reinforcement and hose type 405 in textile reinforced rubber with rubber outer cover.

Hose Ref 400

Hose Ref 404

Hose Ref 405

400 tuyau caoutchouc flexible 404 tuyau caoutchouc flexible 407 tuyau caoutchouc flexible
     
bobine 04-tuyau-caoutchouc-flexible-hydrocarbures norme

DIN 73379

bobine 05-tuyau-caoutchouc-flexible-hydrocarbures

Reel type P
Dimensions :
width : 200 mm
ext. diameter : 170 mm
spindle diameter : 30 mm

Reel type CC
width : 115 mm
ext. diameter : 185 mm
spindle diameter : 45 mm

Intended for supply of fuel to marine engines on pleasure craft, hose 407 corresponds to the international standard ISO 7840 type A1.
This rating defines the inner tube’s lowest permeability to fuels according to that standard.
The quality of the outer cover protects the hose from projections within the engine compartment.
Swaged with end-fittings, this hose can be supplied “ready-to-use”.

norme

NF EN ISO 7840

407 tuyau caoutchouc flexible

Technical specifications :

Inner tube : NBR rubber, resistant to hydrocarbons
Reinforcement : textile braid
Outer cover : CR rubber
Outer finish : smooth
Temperature : - 30°C to +70°C maximum
Production lengths : 40 metres
Colour : black
Marking : Tecalemit - NF EN ISO 7840 - type A1 - lot - dia. - 1 mpa - production date - batch N°

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Burst
pressure
Bend
radius
Weight
  mm mm mm bar bar mm kg/m
407 8X16 8 16 4 10 30 70 0.20
407 10X18 10 18 4 10 30 90 0.23
407 13X22 13 22 4.5 10 30 120 0.36
407 16X25 16 25 4.5 10 30 150 0.40
407 19X29 19 29 5 10 30 190 0.48

Possible end-fittings : Male or female threaded
See also Ref 362, ref 441

Hose REF 411 is intended for suction and delivery of tar, bitumen and hot petroleum products.
The quality of its outer cover affords excellent resistance to ozone and bitumenous products.
It has a low bend radius. it can be swaged with threaded fittings.

411 tuyau caoutchouc flexible

Technical specifications :

Inner tube : black synthetic rubber
Reinforcement : textile plies and metal spiral
Outer cover : abrasion and weather resistant microperforated CR / NBR rubber
Outer finish : wrapped
Temperature : +100°C
Production lengths : 40 metres
Electrical conductivity : 1 copper braid
Colour : black
Marking : Tecalemit - REF 411 - emulsion de bitume 80°C - production date or batch

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Pression
L.N.E
Bend
radius
Weight
  mm Pouce mm mm bar bar mm kg/m
411 19 19 3/4" 30 5,5 5 80 50 0,9
411 25 25 1" 36,5 5,5 5 70 60 1,1

Possible end-fittings : Male threaded with male union 1”1/4, male threaded 3/4 with female union 1”1/4

Hose 416 is intended for suction and delivery hydrocarbon whatever aromatic content.
Its exceptional flexibility and its extremely small radius makes it very handy.
Accordingly, it is installed on most tankers for delivery of oil at service stations.
It comes equipped with end-fittings (helical barbed tail) and two electrical coils providing the electrical conductivity.
This hose can be swaged with threaded fittings and supplied with ADR test certificate.

norme

EN 13765 TYPE 2

416 tuyau caoutchouc flexible

Technical specifications :

Inner tube : polypropylene film
Renforcement : Multiple polypropylene films between two helical turns in galvanized steel
Reinforcement : textile PVC coated
Outer finish :: smooth with external metal protection spiral
Temperature : - 40° à + 100° c
Production lengths : 40 metres
Colour : black with red stripe
Marking : Tecalemit - 416 - PS 10 bar - (trimester/year) - batch N°

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Pression
L.N.E
Bend
radius
Weight
  mm Pouce mm mm bar bar mm kg/m
416 40 40 1”9/16 51 5,5 10 40 85 1,1
416 50 50 2” 61,5 6,2 10 40 125 1,7
416 65 63,5 2”1/2 78 6,2 10 40 150 2,4
416 80 80 3”5/32 93 6,5 10 40 180 2,9
416 100 100 4” 103 6,5 10 40 250 3,7

Possible end-fittings : Guillemin, Camlock, Flanges, b.s.p

Semi-lay flat hose 441 is intended for suction and deliver fuels at a pressure of 10 bar.
It can be used over a wide range of temperatures and its neoprene outer cover ensures excellent resistance to ozone.

441 tuyau caoutchouc flexible

Technical specifications :

Inner tube : black nitrile NBR rubber
Renforcement : textile plies
Outer cover : abrasion and weather resistant neoprene rubber
Electrical conductivity : 1 copper braid
Outer finish : wrapped
Temperature : -40° à +70°c maximum
Production lengths : 40 metres
Colour : black
Marking : Tecalemit - ref 441 - refoulement hydrocarbures 10 bar - batch N°

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Pression
L.N.E
Bend
radius
Weight
  mm Pouce mm mm bar bar mm kg/m
441 19 19 3/4 32 6,5 10 30 90 0,53
441 25 25,4 1” 35 4,8 10 30 254 0,60
441 32 32 1”1/4 47 5 10 30 320 0,74
441 38 38 1”1/2 48 5 10 30 380 0,83
441 40 40 1"9/16 56 8 10 30 380 0,9
441 44 44,5 1”3/4 55 5,25 10 30 445 1,0
441 50 50,8 2” 62 5,6 10 30 510 1,23
441 63 63,5 2”1/2 75 5,75 10 30 635 1,60
441 75 76,2 3” 88 5,9 10 30 762 1,89
441 90 90 3”1/2 104 7 10 30 900 2,72
441 100 101,6 4” 116 7,2 10 30 1016 3,19
441 127 127 5” 143 8 10 30 1270 4,32
441 150 152,4 6” 168 7,8 10 30 1524 5,05

Possible end-fittings : Threaded, guillemin, tankwagen, flange, storz

Hose 462 is particularly appreciated by industrial site maintenance services.
It accepts hot glycol water, compressed air, oil and hydrocarbons up to 40% aromatic content.
It has static electricity conductiveness.
Its reinforcement and thickness give it excellent bend radius.

462 tuyau caoutchouc flexible

Technical specifications :

Inner tube : antistatic NBR rubber
Reinforcement : textile braid
Outer cover : CR / SBR rubber
Outer finish : smooth
Temperature : - 30°C to +70°C maximum
Production lengths : 25 or 50 metres
Colour : black
Marking : Tecalemit - part N° - tuyau multiservice/multipurpose hose - antistatic - ps/wp 25/350psi - DN (mm/inch) - batch N°

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Pression
L.N.E
Bend
radius
Weight
  mm Pouce mm mm bar bar mm kg/m
462 6x14 6 1/4” 14 4 25 85 20 0.16
462 8x16 8 5/16” 16 4 25 85 25 0.21
462 10x18 10 3/8” 18 4 25 85 30 0.26
462 13x21 13 1/2” 21 4 25 85 45 0.33
462 16x25 16 5/8” 25 4.5 25 85 65 0.40
462 19x29 19 3/4” 29 5 25 85 100 0.55
462 25x35 25 1” 35 5 25 85 180 0.60

Possible end-fittings : Threaded, CB range
See also Ref 461, ref 362, ref 405

This hose is used for the loading and unloading of tankers.
It complies with 1765 type S10 and is usually fitted with circular flanges, as per EN 1759 class 150 or class 300.

norme

EN 1765 TYPE S15

470 tuyau caoutchouc flexible

Technical specifications :

Inner tube : abrasion and weather resistant NBR rubber
Reinforcement : high tensile synthetic textile, steel wire helix and antistatic copper wire.
Outer cover: abrasion,ozone,weather,heat and oil resistant special synthetic rubber.
Outer finish : wrapped
Temperature : -30° to + 82° c maximum
Production lengths  60 metres maximum until 6’’, 40 metres maximum of 8 " and 10 ", 12 metres maximum until 16 "
Colour : black
Marking : Tecalemit - part N°- EN 1765 type S10 - dia. - batch N°

Part n° Inner
diameter
Outer
diameter
Working
pressure
Burst
pressure
Negative
pressure
Bend
radius
Weight
  mm Pouce mm mm bar bar mm kg/m
470 50 2’’ 50,8 72 10 40 - 0,92 200 3,5
470 75 3’’ 76,2 100 10 40 - 0,92 400 5,56
470 100 4’’ 101,6 129 10 40 - 0,92 500 7,97
470 125 5’’ 127 162 10 40 - 0,92 650 14,07
470 150 6’’ 152,4 190 10 40 - 0,92 750 17,325
470 200 8’’ 203 243 10 40 - 0,92 950 24,15
470 250 10’’ 254 302 10 40 - 0,92 1200 38,63
470 300 12’’ 305,8 356 10 40 - 0,92 1500 48,5
470 350 14’’ 355,6 408 10 40 - 0,92 2150 60
470 400 16’’ 406 460 10 40 - 0,92 2800 72,5

Possible end-fittings : A brides

This hose is used for the loading and unloading of tankers.
It complies with 1765 type S15 and is usually fitted with circular flanges, as per EN 1759 class 150 or class 300.

norme

EN 1765 TYPE S15

470 tuyau caoutchouc flexible

Technical specifications :

Inner tube : abrasion and weather resistant NBR rubber
Reinforcement : high tensile synthetic textile, steel wire helix and antistatic copper wire.
Outer cover: abrasion,ozone,weather,heat and oil resistant special synthetic rubber.
Outer finish : wrapped
Temperature : -30° to + 82° c maximum
Production lengths :  60 metres maximum until 6’’, 40 metres maximum of 8 " and 10 ", 12 metres maximum until 16 "
Colour : black
Marking : Tecalemit - part N°- EN 1765 type S15 - dia. - batch N°

Part n° Inner
diameter
Outer
diameter
working
pressure
Burst
pressure
Negative
pressure
Bend
radius
Weight
  mm Pouce mm mm bar bar mm kg/m
471 50 2’’ 50,8 74 15 60 - 0,92 200 3,9
471 75 3’’ 76,2 104 15 60 - 0,92 400 6,15
471 100 4’’ 101,6 134 15 60 - 0,92 500 9,35
471 125 5’’ 127 162 15 60 - 0,92 650 13,75
471 150 6’’ 152,4 190 15 60 - 0,92 750 17,45
471 200 8’’ 203 245 15 60 - 0,92 950 25,00
471 250 10’’ 254 303 15 60 - 0,92 1200 38,250
471 300 12’’ 305,8 362 15 60 - 0,92 1500 50,75
471 350 14’’ 355,6 416 15 60 - 0,92 2150 65,225
471 400 16’’ 406 479 15 60 - 0,92 2800 82,25

Possible end-fittings : A brides

The 489 hose is especially conceived for the ground refuelling of aircrafts having an aromatic content up to 50 %.
It meets EN 1361 type B standard.

489 tuyau caoutchouc flexible

Technical specifications :

Inner tube: aviation gasolines and jet fuels resistant,conductive nbr rubber.
Reinforcement : high tensile synthetic textile and 2 antistatic copper wire.
Outer cover: abrasion,ozone,weather,heat and oil resistant special synthetic rubber.
Production lengths : 40 & 60m.
Temperature: -30°C à to 65°C.
Electrical conductivity: < = 106/m.
Outer finish : smooth.
Colour : black.
Marking : Tecalemit - Part N° - EN 1361 type B - DN (mm/inch) - batch N°

Part n° Inner
diameter
Outer
diameter
Working
pressure
Test
pressure
Min. burst
pressure
Bend
radius
Weight
  mm pouce mm bar bar bar mm Kg/m
489 19 3/4” 19 29 20 40 80 113 0,522
489 25 1” 25,4 38 20 40 80 150 0,842
489 32 1”1/4 32 45 20 40 80 200 1,003
489 38 1”1/2 38 51 20 40 80 230 1,162
489 50 2” 50,8 65 20 40 80 305 1,699
489 65 2”1/2 63,5 79 20 40 80 390 2,063
489 75 3” 76,2 92 20 40 80 460 2,562
489 100 4” 101,6 120 20 40 80 610 3,734

Intended for suction and discharge of hydrocarbons, hose 491 has 4 textile plies and a metal spiral.
It is a very robust suction hose.
It can be used over a wide range of temperatures and its neoprene outer cover ensures excellent resistance to ozone.
It is used for discharge when a low bend radius is necessary.
This versatile hose, available in many diameters, can be cut to order.

491 tuyau caoutchouc flexible

Technical specifications :

Inner tube : black NBR nitrile rubber
Reinforcement : 4 textile plies and one metal spiral
Outer cover : abrasion and weather resistant neoprene rubber
Electrical conductivity : 1 copper braid
Outer finish : wrapped
Temperature : - 40°C to +70°C maximum
Production lengths : 20 metres
Colour : black
Marking : Tecalemit - REF 491 - aspiration refoulement hydrocarbures 10 bar - production date or batch

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Burst
pressure
Bend
radius
Weight
  mm Pouce mm mm bar bar mm kg/m
491 19 19 3/4” 32 6.5 10 80 120 0.9
491 25 25,4 1” 38 6.5 10 70 150 1.1
491 28 28 1"1/8 41 65 10 30 170 1.0
491 30 30 1” 3/16 43 6.5 10 60 190 1.1
491 32 31,8 1” 1/4 45 6.5 10 60 200 1.1
491 35 35 1” 3/8 48 6.5 10 50 220 1.0
491 38 38,1 1” 1/2 52 7 10 50 250 1.7
491 40 40 1” 9/16 54 7 10 40 280 1.8
491 42 42 1” 21/32 56 7 10 40 300 1.9
491 45 45 1”3/4 57 6 10 40 300 1.7
491 50 50,8 2” 64 7 10 40 300 2.2
491 55 55 1"3/16 69 7 10 30 310 2.2
491 60 60 2” 3/8 74 7 10 30 320 2.2
491 65 63,5 2” 1/2 77 7 10 30 540 2.5
491 70 70 2” 3/4 84 7 10 30 570 2.8
491 75 76,2 3” 90 7 10 30 600 3.5
491 80 80 3"5/32 95 7.5 10 30 700 3.2
491 90 90 3” 1/2 104 7 10 30 720 4.0
491 100 101,6 4” 116 7 10 30 800 4.8
491 110 110 4” 11/32 127 8.5 10 30 890 5.3
491 114 114,3 4” 1/2 131 8.5 10 30 940 6.0
491 120 120 4” 23/32 138 9 10 30 980 6.3
491 125 127 5” 145 9 10 30 1100 6.6
491 140 139,7 5” 1/2 158 9 10 30 1250 8.0
491 150 152,4 6” 172 10 10 30 1500 9.0
491 160 160   182 11 10 30 1700 9.8
491 200 203,2 8” 230 14 10 30 2000 17

Possible end-fittings : Threaded, guillemin, tankwagen, flange, storz
See also Ref 492

Hose 492 is intended for suction of oil on hydraulic powerpacks.
Economic, it can be used over a wide range of temperatures and its neoprene outer cover ensures excellent resistance to ozone.
It is used for discharge when a low bend radius is necessary.

492 tuyau caoutchouc flexible

Technical specifications :

Inner tube : black nitrile rubber
Reinforcement : 4 textile plies and one metal spiral
Outer cover : abrasion and weather resistant neoprene rubber
Electrical conductivity : 1 copper braid
Outer finish : wrapped
Temperature : - 40°C to +70°C maximum
Production lengths : 40 metres
Colour : black
Marking : Tecalemit - part N° - dia. - batch N°

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Burst
pressure
Bend
radius
Weight
  mm Pouce mm mm bar bar mm kg/m
492 19 19 3/4” 29 5.5 5 15 130 0.70
492 25 25 1” 37 6 5 15 180 0.80
492 30 30 1”3/16 41 5.5 5 15 210 0.91
492 32x45 32 1”1/4 44,5 6.25 5 15 230 1.0
492 35 35 1”3/16 46 5.5 5 15 245 1.10
492 38 38 1”1/2 52 7 5 15  270 1.2
492 40 40 1”9/16 51 5.5 5 15 280 1.28
492 42 42 1”21/32 53 5.5 5 15 295 1.32
492 45 45 1”3/4 56 5.5 5 15 315 1.40
492 48 48 - 60 6 5 15 325 1.50
492 50 50,8 2” 63,2 5.5 5 15 350 1.60
492 55 55 - 66 5.5 5 15 380 1.90
492 60 60 2”3/8 72 6 5 15 420 2.30
492 63 63,5 2”1/2 75 6 5 15 450 2.50
492 70 70 2”3/4 82 6 5 15 500 2.80
492 76 76 3” 89 6.5 5 15 550 3.10
492 80 80 3”5/32 93 6.5 5 15 600 3.50
492 90 90 3”1/2 103 6.5 5 15 650 3.90
492 100 101,6 4” 113 6.5 5 15 690 4.30

Possible end-fittings : Threaded
See also Ref 491

Intended for suction and discharge of hydrocarbons, hose 495 has 4 textile plies and a metal spiral.
It is a very robust suction hose.
It can be used over a wide range of temperatures and its neoprene outer cover ensures excellent resistance to ozone.
It is intended for the delivery of oil by truck - tank.
It meets NF EN 1761 type SD (suction and delivery) standard.
this hose can be swaged with guillemin end-fittings and supplied with TMD modificate (29/05/09) test certificate.

495 tuyau caoutchouc flexible

Technical specifications :

Inner tube : black nitrile NBR rubber
Reinforcement : 4 textile plies and one metal spiral
Outer cover : abrasion and weather resistant neoprene rubber
Electrical conductivity : 2 copper braid (< 106Ω/m)
Outer finish : wrapped
Temperature : -40°C à +70°C
Production lengths : 40 metres
Colour : black
Marking : Tecalemit - 495 - EN 1761 : 1999 SD (Ø) - PMS10 - Ω/m - CL

Part n° Inner
diameter
Outer
diameter
Wall
thickness
Working
pressure
Burst
pressure
Bend
radius
Weight
  mm Pouce mm mm bar bar mm kg/m
495 70 70 2” 3/4 84 7 10 40 300 2,8
495 75 75 3” 91 7,5 10 40 350 2,6
495 90 90 3” 1/2 106 8 10 40 400 4,2
495 100 101,6 4” 118 8 10 40 450 5,8
495 120 120 4”3/4 138 11 10 40 650 7,0
495 150 152,4 6” 175 11,5 10 40 750 9,0

Possible end-fittings : Threaded, guillemin, tankwagen, flange, storz

The 496 hoses is especially conceived for the ground refuelling of aircrafts having an aromatic content up to 50 %.
It meets EN 1361 type c standard.

496 tuyau caoutchouc flexible

Technical specifications :

Inner tube: aviation gasolines and jet fuels resistant,conductive NBR rubber.
Reinforcement: high tensile synthetic textile braid.
Outer cover: abrasion, ozone, weather, heat and oil resistant special synthetic rubber.
Production lengths : 40 & 60m.
Temperature: -30°C à to 65°C.
Electrical conductivity: < = 106/m.
Outer finish : smooth.
Colour : black.
Marking : Tecalemit - Part N° - EN 1361 type C - DN (mm/inch) - batch N°.

Part n° Inner
diameter
Outer
diameter
Working
pressure
Test
pressure
Burst
pressure
Bend
radius
Weight
  mm pouce mm bar bar bar mm Kg/m
496 19 3/4” 19 29 20 40 80 113 0,522
496 25 1” 25,4 38 20 40 80 150 0,840
496 32 1”1/4 32 45 20 40 80 200 1,000
496 38 1”1/2 38 51 20 40 80 230 1,155
496 50 2” 50,8 65 20 40 80 305 1,710
496 65 2”1/2 63,5 79 20 40 80 390 2,070
496 75 3” 76,2 92 20 40 80 460 2,580
496 100 4” 101,6 120 20 40 80 610 3,760

The 489 hose is especially conceived for the ground refuelling of aircrafts having an aromatic content up to 50 %.
It meets EN 1361 type E standard.

498 tuyau caoutchouc flexible

Technical specifications :

Inner tube: aviation gasolines and jet fuels resistant,conductive NBR rubber.
Reinforcement: high tensile synthetic textile, 2 steel wire helix and 2 antistatic copper wire.
Outer cover: abrasion, ozone, weather, heat and oil resistant special synthetic rubber.
Production lengths: 40 & 60m.
Temperature: -30°C à to 65°C.
Electrical conductivity: < = 106/m.
Outer finish: smooth.
Colour: black.
Marking: Tecalemit - Part N° - EN 1361 type E - DN (mm/inch) - batch N°.

Part n° Inner
diameter
Outer
diameter
Working
pressure
Test
pressure
Burst
pressure
Negative
pressure
Bend
radius
Weight
  mm pouce mm bar bar bar bar mm Kg/m
498 19 3/4” 19 31 20 40 80 -0,92 85 0,686
498 25 1” 25,4 39 20 40 80 -0,92 115 0,972
498 32 1”1/4 32 46 20 40 80 -0,92 150 1,218
498 38 1”1/2 38 53 20 40 80 -0,92 180 1,592
498 50 2” 50,8 67 20 40 80 -0,92 250 2,320
498 65 2”1/2 63,5 81 20 40 80 -0,92 325 2,860
498 75 3” 76,2 95 20 40 80 -0,92 400 3,701
498 100 4” 101,6 123 20 40 80 -0,92 550 5,166
certication AEO
Logo NF 377
Certifications DREAL
Certification Veritas
Rubber hoses
hydraulic hoses
hydraulic fittings
tubes pneumatiques