Spiral tubes MANULAN®

With better flexibility than polyamide, polyurethane is particularly adapted to the production of spiralled tubes.
Moreover, MANULAN® spiralled tubes have an excellent resistance to impact and abrasion.
They have straight lengths at each end to facilitate use and connections.
Their working pressure is 9 bars at 30°C.
they are equipped with 1/4” or 3/8” male BSP fittings according to tube diameter.

Spirales pneumatiques ateliers industriels
Polyurethane spiralled tubes (Manulan® spirals)
Part n° Outer
diameter
(mm)
Inner
diameter
(mm)
Contracted
length
(mm)
Working
length
(m)
End
length 1
(mm)
End
length 2
(mm)
Coil
outer
diameter
(mm)
Weight
(gr/mm)
Male bsp
end-fittings
1089400200399 4 2,5 600 2 100 300 24 80 1/4
1089400400399 4 2,5 760 4 100 300 24 120 1/4
1089900200399 6 4,0 630 2 100 300 32 120 1/4
1089900400399 6 4,0 850 4 100 300 32 200 1/4
1089900600399 6 4,0 1070 6 100 300 32 280 1/4
1089900800399 6 4,0 1290 8 100 300 32 360 1/4
1089100200399 8 5,0 800 2 100 500 42 210 1/4
1089100400399 8 5,0 1000 4 100 500 42 360 1/4
1089100600399 8 5,0 1200 6 100 500 42 510 1/4
1089100800399 8 5,0 1400 8 100 500 42 660 1/4
1089200200399 10 6,5 800 2 100 500 52 300 3/8
1089200400399 10 6,5 1000 4 100 500 52 520 3/8
1089200600399 10 6,5 1200 6 100 500 52 740 3/8
1089200800399 10 6,5 1400 8 100 500 52 960 3/8
1089300200399 12 8,0 790 2 100 500 65 400 3/8
1089300400399 12 8,0 990 4 100 500 65 700 3/8
1089300600399 12 8,0 1190 6 100 500 65 1000 3/8
1089300800399 12 8,0 1380 8 100 500 65 1300 3/8
certication AEO
Logo NF 377
Certifications DREAL
Certification Veritas
Rubber hoses
hydraulic hoses
hydraulic fittings
tubes pneumatiques