Pneumatic connectors

Made in anodised aluminium alloy, it ensures the simultaneous connection of 12
Pneumatic circuits of diameters 4, 6 or 8mm and electric signals (see table).
Selective disconnection under pressure is authorised according to choice of inserts.

Connector components :

Choice of different connector components :

Made in blue anodised aluminium alloy, it ensures simultaneous connection of from 4 to 21 circuits of diameter 4, 6, 8 or 10mm and can be used on multiple bulkheads.
This connector is available in diameters 50 and 80mm and offers the advantage of being able to choose the tool-less components. The connection is polarised and the long housings ensure mechanical support to the multitubes.
Working pressure is 12 bars and disconnection under pressure is not authorised.

Made in blue anodised aluminium alloy, it ensures simultaneous connection of from 2 to 21 circuits of diameters 4, 6, 8 or 10mm.
This connector has the added advantage of allowing the choice of the different components without any tools.
Connection is polarised and the long housings afford mechanical support to the multitubes.
Working pressure is 12 bars and disconnection under pressure is not authorised.

Made in anodised aluminium alloy and plated brass for the inserts, it allows connection of from 1 to 12 tubes (dias. 4, 6 or 8mm) full flow or with auto shut-off using normalised connectors.
This connector offers the advantage of the choic of components without tools.
Selective disconection under pressure is possible according to choice of female inserts.
It has a polarised assembly and its working pressure is 12 bars.
Inserts are pin-mounted.
Different sections can be mounted on the same circuit and are totally mixable for diameters 4, 6 and 8mm

Made in blue anodised aluminium alloy, it authorises pneumatic flow stoppage by a simple “push-pull” action with draining via a sintered brass silencer.
Its 1/2” bsp supply ensures full flow for a working pressure of 12 bars.
Its modularity allows mounting of as many valves as required with foolproof assembly and lockable function.

Made in blue anodised aluminium alloy, it authorises pneumatic flow stoppage via a simple “push-pull” action with draining through a sintered bronze silencer.
Its 1/2” bsp supply ensures full flow for a working pressure of 12 bars.
Its modularity allows the mounting of as many valsves as required with foolproof assembly and locking function.
This product is evolutive, offering the possibility of changing cartridge diameters (dia. 4, 6 or 8mm).

Made in black anodised aluminium alloy, it ensures the mounting of the valve directly on the cylinder.
It can be coupled with the following functions :
- Speed control by flow reduction.
- Position locking by valve.
- Position detection by pressure drop valve.
The following table gives the different characteristics of monofuction and multifunction cylinder bases.

Made in black anodised aluminium alloy, it ensures actuator drain whilst maintaining stackability.
Exhaust is collected at 12 bars maximum with lubricated or dry air. locking is an optional availability.
This product is evolutive as it offers the possibility of changing cartidge diameters (4, 6 or 8mm).

certication AEO
Logo NF 377
Certifications DREAL
Certification Veritas
Rubber hoses
hydraulic hoses
hydraulic fittings
tubes pneumatiques