Icone newsNews
Icone catalogueCatalogs
Icone frFr
Nous contacterContact
icone searchTecalemit RCMH


Hydraulic hoses with wire spiral

+ -

T 532
Hose for aviation oil

 T532 tuyau hydraulique flexible
Click to collapse

In the field of power transmission by hydraulic oil, T532 can convey Skydrol up to 43 bars.
It can also be used for superheated steam up to 18 bars at 232°C.
It is possible to manufacture the ISO 6134-2B certified hose 533 with an oil-resistant outer cover.
Is structure reinforced by metal spirals gives excellent bend radius.
The EPDM rubber ensures long service life.
It meets ISO 6134-2A standards.

T 532

 T532-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black EPDM rubber
Reinforcement : metal spirals
Outer cover : black EPDM rubber
Outer finish : fine tape-wrapped
Temperature : - 40°C to +232°C
Production lengths : 40 metres except dias. 19, 25 and 53 : 60 metres
Colour : black with red lay line
Marking : Tecalemit Flexibles - part N° - NFT 47263 - DN (mm/inch) - batch N°

Part N° Mod. Inner
diameter		 Outer
diameter		 Wall thickness Working
pressure		 Burst
pressure		 Bend
radius		 Weight
    mm Pouce mm mm bar bar mm kg/m
9935313 8 12,7 1/2” 25 6.0 18 180 120 0.6
9935316 10 15,9 5/8” 29 6.5 18 180 160 0.8
9935319 12 19 3/4” 32 6.5 18 180 190 0.9
9935325 16 25,4 1” 38 6.5 18 180 250 1.2
9935332 20 31,8 1” 1/4 46 7.0 18 180 320 1.5
9935338 24 38,1 1” 1/2 54 8.0 18 180 200 1.7
9935350 32 50,8 2” 68 8.5 18 180 500 2.3
9935353   55 2"3/8 71 8.5 18 180 532 2.4
9935363 40 63,5 2”1/2 80 8.0 18 180 630 2.8
9935376 48 76 3” 93 8.5 18 180 750 2.6
+ -

T 911 NF EN 856 4SP
Hydraulic hose very high pressure
4 steel wire spirals

 T911 tuyau hydraulique flexible
Click to collapse

Produced on rigid mandrils from 3/4” up, these hoses are vulcanised in a very long autoclave.
This hose is usually intended for power transmission at high pressures.
It is used in industry, shipping and on earth-moving equipment.
Hoses can be supplied equipped with swaged fittings and test certificates.
It meets the NF EN 856 4SP standard.
The quality of its neoprene outer cover complies with MSHA (Mine Safety and Health Administration) requirements.

T 911 NF EN 856 4SP

MSHA

 T911-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black synthetic rubber
Reinforcement : 4 steel wire spirals
Outer cover : oil and weather resistant neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C - peaks to 125°C
Production lengths : 61 metres and variable
Colour : black
Marking : Tecalemit Flexibles - part N° - NF EN 856 4SP - DN (mm/inch) - wp/ps (bars) - batch N°

Part N° Mod. Inner
diameter		 Reinforcement
outer diameter		 Outer
diameter		 Working
pressure		 Test
pressure		 Burst
pressure		 Bend
radius		 Weight
    mm Inch mm mm bar bar bar mm Kg/m
9939108 4 6,4 1/4” 14,6 17,9 540 1080 2160 150 0,62
9939308 6 9,5 3/8” 17,5 22,2 501 1002 2004 180 0,85
9939508 8 12,7 1/2” 20,2 25,2 448 896 1792 230 0,95
9939608 10 15,9 5/8” 23,8 28,6 384 769 1538 250 1,14
9939708 12 19,1 3/4” 28,2 32,0 456 911 1823 300 1,48
9939808 16 25,4 1” 35,3 41,0 357 714 1428 340 2,06
9937900 20 31,8 1”1/4 46,0 51,2 305 611 1222 460 3,22
9936900 24 38,1 1”1/2 52,4 58,0 279 559 1118 560 3,74
9936910 32 50,8 2” 65,3 70,4 252 504 1008 660 4,50
+ -

T 912 NF EN 856 4SH
Hydraulic hose very high pressure
4 steel wire spirals

 T912 tuyau hydraulique flexible
Click to collapse

Produced on rigid mandrils, these hoses are vulcanised in long length autoclaves.
This hose is usually employed for power transmission at high pressures.
T912 is used in industry, shipping and on earth-moving equipment.
It meets NF EN 856 4SH standards.
The quality of its neoprene outer cover complies with MSHA (Mine Safety and Health Administration) requirements.

T 912 NF EN 856 4SH

MSHA

 T912-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black nitrile rubber
Reinforcement : 4 or 6 metal spirals
Outer cover : oil and weather resistant neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C - peaks to 125°C
Production lengths : 61 metres
Colour : black
Marking : Tecalemit Flexibles - part N° - NF EN 856 4SH - DN (mm/inch) - wp/ps (bars) - batch N°

Part N° Mod. Inner
diameter		 Reinforcement
outer diameter		 Outer
diameter		 Working
pressure		 Test
pressure		 Burst
pressure		 Bend
radius		 Weight
    mm Inch mm mm bar bar bar mm Kg/m
9939807 10 15,9 5/8” 23,6 28,4 521 1042 2084 250 1,10
9939809 12 19,1 3/4” 28,4 32,2 456 912 1825 280 1,56
9939810 16 25,4 1” 35,2 38,7 452 903 1807 340 2,09
9939811 20 31,8 1”1/4 41,9 45,5 365 729 1459 460 2,57
9939812 24 38,1 1”1/2 48,8 53,5 361 721 1443 560 3,42
9939813 32 50,8 2” 63,2 68,1 295 589 1179 700 4,73
+ -

T 914 NF EN 856 4SH SUPER ABRA
Hydraulic hose very high pressure
4 steel wire spirals

 T914 tuyau hydraulique flexible
Click to collapse

Produced on rigid mandrils, these hoses are vulcanised in long length autoclaves.
This highly abrasion resistant hose is normally intended for high pressure delivery.
Thanks to its special synthetic rubber outer cover, it is particularly resistant to abrasion, oils, fuels and atmospheric agents.
T914 is used in industry, shipping and on earth-moving equipment. 
It meets NF EN 856 4SH standards.

T 914 NF EN 856 4SH
SUPER ABRA

 T914-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black nitrile rubber
Reinforcement : 4 or 6 metal spirals
Recouvrement : Special synthetic rubber outer cover resistant to abrasion, oils, fuels and atmospheric agents.
Outer finish : wrapped
Temperature : - 40°C to +100°C - peaks to 125°C
Production lengths : 61 metres
Colour : black
Marking : Tecalemit Flexibles - part N° - NF EN 856 4SH - ANTI ABRASIF - DN (mm et pouce) - wp/ps (bars) - N°Lot

Part N° Mod. Inner
diameter		 Reinforcement
outer diameter		 Outer
diameter		 Working
pressure		 Test
pressure		 Burst
pressure		 Bend
radius		 Weight
    mm Inch mm mm bar bar bar mm Kg/m
9939849 12 19,1 3/4” 28,4 32,2 456 912 1825 280 1,56
9939850 16 25,4 1” 35,2 38,7 452 903 1807 340 2,09
9939851 20 31,8 1”1/4 41,9 45,5 365 729 1459 460 2,57
+ -

T 915 NF EN 856 R15
Hydraulic hose very high pressure
isobaric 420 bars
4 or 6 steel wire spirals

 T915A tuyau hydraulique flexible
T915B tuyau hydraulique flexible
Click to collapse

T915 is among the toughest hydraulic hoses of the range.
I is produced on rigid mandrils and vulcanised in straight lengths.
Its working pressure is 420 bars for all diameters.
Swaging of fittings is carried out after internally and externally skiving the hose.
The metal structure of the hose is then perfectly in cohesion with the metal fitting.
The quality of its neoprene outer cover complies with MSHA (Mine Safety and Health Administration) requirements.

T 915 NF EN 856 R15

MSHA

T915A-tuyau-hydraulique-flexible

T915B-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black nitrile rubber
Reinforcement : 4 high tensile steel spirals up to 1”, 6 high tensile steel spirals from 1”1/4 up
Outer cover : neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +120°C - peaks to 125°C
Production lengths : 61 metres
Colour : black
Marking : Tecalemit Flexibles - part N° - NF EN 856 R15 - DN (mm/inch) - wp/ps (bars) - batch N°

Part N° Mod. Inner
diameter		 Outer
diameter		 Working
pressure		 Test
pressure		 Burst
pressure		 Bend
radius		 Weight
    mm Inch mm bar bar bar mm Kg/m
9939002 12 19,1 3/4” 32 420 840 1680 265 1,54
9939003 16 25,4 1” 38,4 420 840 1680 330 2,14
9939004 20 31,7 1”1/4 49,3 420 840 1680 445 3,97
9939005 24 38,1 1”1/2 57,3 420 840 1680 530 4,98
9939006 32 50,8 2" 74 420 840 1680 635 7,32
+ -

T 916
High pressure hose
4 or 6 tensile steel spiral

 T915A tuyau hydraulique flexible
T915B tuyau hydraulique flexible
Click to collapse

The T916 hose is intended for hydraulic systems with high pressure peaks, under severe operating conditions, for mining, offshore, perforation, etc ...
The standard version inner tube is suitable for conveying hydraulic fluids based on mineral, glycol and vegetable oils.
Its MSHA approved coating is resistant to severe abrasion, oils, fuels and atmospheric agents.
The textile folds distribute the pressure forces applied to the inner tube.
The steel wires making up the cables are treated against corrosion.
We crimp various types of tips on this pipe: flanges according to various international standards, line-pipe tips, specific tips depending on request.

5/8" to 1"
MSHA

 T961 962 tuyau hydraulique flexible
   

2"1/2 to 3"
MSHA

 T1362 tuyau hydraulique flexible

Technical specifications :
Inner tube : Synthetic rubber
Reinforcement : 6 very high tensile steel spiral
Outer cover : MSHA resistant synthetic rubber
Outer finish : wrapped
Temperature : -40°C to +100°C - peaks to 125°C
Colour : black

Part N° Mod. Inner
diameterr		 Reinforcement
outer diameter		 Outer
diameter		 Working
pressure		 Test
pressure		 Burst
pressure		 Bend
radius		 Weight
    mm Inch mm mm bar bar bar mm Kg/m
9939716 10 16 5/8" 23,8 26 350 700 1400 125 0,925
9939816 12 19 3/4" 28,2 31 350 700 1400 140 1,320
9939916 16 25,4 1" 35,1 38,4 350 700 1400 150 1,950
9938907  32 63,5 2"1/2 80 84,5 350 700 1400 800 9,100
9938908 48 76,2 3” 93,3 97,3 210 420 900 900 10,300

Possible end-fittings : Flange, threaded male NPT
Marking : Tecalemit - part n°- MSHA - bar - batch n°
+ -

T 961
Hydraulic hose for very high pressure waterblasting

 T961 962 tuyau hydraulique flexible
Click to collapse

Hose types T961 and T962 are mainly intended for very high pressure waterblasting.
For example, they are used in refineries, sugar mills, paint spray booths in the automotive industry and also for decennial maintenance of engineering works.
Used with water, the safety factor between burst and working pressure is 2.5.
The hose must be internally and externally skived before mounting and swaging of end-fittings.
The metal structure of the hose is then perfectly in cohesion with the metal fitting.

T 961

 T961-962-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black synthetic rubber
Reinforcement : textile layers, 4 steel spiral layers
Outer cover : chloroprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C
Production lengths : variable
Colour : black
Marking : Tecalemit Flexibles - part N° - DN (mm/inch) - batch N°

Part N° Mod. Inner
diameter		 Reinforcement
outer diameter		 Outer
diameter		 Working
pressure		 Test
pressure		 Burst
pressure		 Bend
radius		 Weight
    mm Inch mm mm bar bar bar mm Kg/m
9937944 4 6,3 1/4” 14,6 17,6 1000 1250 2500 130 0,595
9938044 6 9,5 3/8” 17,5 21,3 850 1075 2125 155 0,785
9938144 8 12,7 1/2” 20,2 24,6 800 950 1900 200 0,920
9938244 12 19 3/4” 28,2 32 750 925 1850 250 1,930
9938344 16 25,4 1” 35,1 38,4 700 850 1700 300 2,125
+ -

T 962
Hydraulic hose for very high pressure waterblasting

 T961 962 tuyau hydraulique flexible
Click to collapse

Hose types T961 and T962 are mainly intended for very high pressure waterblasting.
For example, they are used in refineries, sugar mills, paint spray booths in the automotive industry and also for decennial maintenance of engineering works.
Used with water, the safety factor between burst and working pressure is 2.5.
The hose must be internally and externally skived before mounting and swaging of end-fittings.
The metal structure of the hose is then perfectly in cohesion with the metal fitting.

T 962

 T961-962-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black synthetic rubber
Reinforcement : textile layers, 4 steel spiral layers
Outer cover : chloroprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C
Production lengths : variable
Colour : black
Marking : Tecalemit Flexibles - part N° - DN (mm/inch) - batch N°

Part N° Mod. Inner
diameter		 Reinforcement
outer diameter		 Outer
diameter		 Working
pressure		 Test
pressure		 Burst
pressure		 Bend
radius		 Weight
    mm Inch mm mm bar bar bar mm Kg/m
9938444 6 9,5 3/8” 18 20,4 1250 1580 3125 210 0,875
9938511 8 12,7 1/2” 21,6 24,6 1100 1375 2750 230 1,215
9938644 12 19 3/4” 29 32 1100 1375 2750 250 1,855
+ -

T 1362
Hydraulic hose for very high pressure waterblasting

 T1362 tuyau hydraulique flexible
Click to collapse

Hose type T1362 is mainly intended for very high pressure waterblasting.
For example, it is used in refineries, sugar mills, paint spray booths in the automotive industry and also for decennial maintenance of engineering works.
Used with water, the safety factor between burst and working pressure is 2.5.
The hose must be internally and externally skived before mounting and swaging of end-fittings.
The metal structure of the hose is then perfectly in cohesion with the metal fitting.

T 1362

 T1362-tuyau-hydraulique-flexible

Technical specifications :

Inner tube : black synthetic rubber
Reinforcement : 6 wire spirals
Outer cover : chloroprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C
Production lengths : variable
Colour : black
Marking : Tecalemit Flexibles - part N° - DN (mm/inch) - batch N°

Part N° Mod. Inner
diameter		 Reinforcement
outer diameter		 Outer
diameter		 Working
pressure		 Test
pressure		 Burst
pressure		 Bend
radius		 Weight
    mm Inch mm mm bar bar bar mm Kg/m
9938744 6 9,5 3/8” 19,6 24 1450 1820 3625 200 1,135
9938844 8 12,7 1/2” 22,3 29 1450 1820 3625 250 1,420
9938944 12 19 3/4” 30,8 34 1350 1690 3375 300 2,140
9939044 16 25,4 1” 38,1 43 900 1150 2300 350 3,210
certication AEO
Logo NF 377
Certifications DREAL
Certification Veritas
Rubber hoses
hydraulic hoses
hydraulic fittings
tubes pneumatiques