Air & gas delivery rubber hoses

The hose 201 is used for compressed air at high pressures.
It has characteristics superior to the international standard ISO 2398 type 3 (high pressure), class C (resistant to oil), NT (normal temperature).
Its nitrile inner tube is resistant to compressor oil. its outer cover is resistant to abrasion.
Its metal wire spirals give good flexibility.
It can be found in mining and public works.
It can be equipped with swaged fittings and also anti-whip cables or safety stockings

NF EN ISO 2398 3/C/NT

Technical specifications :

Inner tube : smooth oil resistant NBR rubber
Reinforcement : 2 or 4 metal spirals
Outer cover : abrasion and weather resistant neoprene rubber
Outer finish : fine tape wrapped
Temperature - 40°C to + 70° C
Production lengths : 60 metres
Colour : black
Marking : REF 201 - EXCEED ISO 2398 3/C/NT - batch N° -  Microperforated

Possible end-fittings : Male threaded, female BSP, robur, weco, flangee
See also Ref 223, Ref 224

As flexible in winter as in summer, compressed air hose REF 203 is used in workshops and particularly in garages.
Its electrically-conductive inner tube eliminates static electricity.
It can be produced in all diameters up to ID 19mm.
It conforms with ISO 2398 2-A-LT : medium pressure, non-oil resistant and low temperature..

NF EN ISO 2398

Technical specifications :

Inner tube : electrically - conductive EPDM
Reinforcement : textile braid
Outer cover : EPDM
Outer finish : smooth
Temperature : -40° C to 70°C maximum
Production lengths : 20 and 40 metres
Colour : blue
Marking : RCMH - REF 203 - tuyau air conducteur/air conductive hose - NF ISO 2398 - 2A - dia. ps/wp 2 mpa/20bar/300psi - date - batch N°

Possible end-fittings : Express, coupling
See also Ref 222, Ref 234

This hose is used in replacement of polyamide 12 brake tubes according to DIN 74324 for repairs of road trailers.
It gives increased safety to braking systems.

Technical specifications :

Inner tube : SBR / NR
Reinforcement : textile braids
Outer cover : SBR EPDM rubber
Admissible negative pressure : 0.9 bar
Outer finish : smooth
Temperature : - 30°C to +70°C
Production lengths : variable
Colour : black
Marking : tecalemit flexibles - UTAC ST 954-02 - dia. - SEL - batch N°

Possible end-fittings : Threaded
See also : Tube PA12 DIN 74324

These hoses comply with the international standards EN 559 and ISO 3821 in single duct version or in twin version.
They are light and manageable.
their safety coefficients are very high and their resistance to hot spots and to the flame are excellent.

EN ISO 3821 EN 559

Technical specifications :

Inner tube : NBR/SR
Reinforcement : synthetic yarns
Outer cover : abrasion and weather resistant synthetic rubber
Outer finish : smooth
Temperature : - 30°C to +80°C
Production lengths : 40 metres
Colour : blue
Marking : TECALEMIT OXYGENE - EN 559 - ISO 3821 - 2 MPa (20 bars) - 10 - YEAR - batch N° double packing

Possible end-fittings : Threaded, coupling

These hoses comply with the international standards EN 559 and ISO 3821 in single duct version or in twin version.
They are light and manageable.
their safety coefficients are very high and their resistance to hot spots and to the flame are excellent.

EN ISO 3821 EN 559

Technical specifications :

Inner tube : NBR rubber
Reinforcement : synthetic yarns
Outer cover : abrasion and weather resistant synthetic rubber
Outer finish : smooth
Temperature : - 30°C to +80°C
Production lengths : 40 metres
Colour : orange
Marking : TECALEMIT PROPANE - EN 559 - ISO 3821 - 2 MPa (20 bars) - 10 - YEAR - batch N° double packing

Possible end-fittings : Threaded, coupling

These hoses comply with the international standards EN 559 and ISO 3821 in single duct version or in twin version.
They are light and manageable.
their safety coefficients are very high and their resistance to hot spots and to the flame are excellent.

EN ISO 3821 EN 559

Technical specifications :

Inner tube : NBR/SR
Reinforcement : synthetic yarns
Outer cover : abrasion and weather resistant synthetic rubber
Outer finish : smooth
Temperature : - 30°C to +80°C
Production lengths : 40 metres
Colour : red
Marking : TECALEMIT ACETYLENE - EN 559 - ISO 3821 - 2 MPa (20 bars) - 10 - YEAR - batch N° double packing

Possible end-fittings : Threaded, coupling

Compressed air hose ref 222 is used in workshops.
Hose 222 has characteristics above 2398 Type 1 (operating pressure 10 bar), Class B (resistant to compressor oils), and category NT (for normal temperature).
It is also chosen for air supply of jackhammers on worksites for its competitiveness.
It can be produced in any inner diameter up to 25mm.

Technical specifications :

Inner tube : smooth SBR / NBR rubber
Reinforcement : textile braid
Outer cover : SBR rubber
Outer finish : smooth
Temperature : - 30°C to +70°C maximum
Production lengths : 40 metres, possibility of 100 metres
Colour : black or other
Marking : TECALEMIT - 222 19 - TUYAU AIR/AIR HOSE - NF EN ISO 2398 - 1B - 19mm/3/4"- WP/PS 15BARS/210 PSI - BATCH N°

Possible end-fittings : Express, coupling
See also Ref 221, Ref 234

Hose 223 has characteristics above Standard 2398 Type 1 (operating pressure 10 bar), Class B (resistant to compressor oils), and Category NT (for normal temperature)
Its inner tube is resistant to compressor oil.
its outer cover is abrasion resistant.
Its life span and inter-layer are excellent.
Produced from diameter 30mm upwards, it can be found on high rate air compressors

Technical specifications :

Inner tube : SBR / NBR rubber
Reinforcement : textile plies
Outer cover : abrasion and weather resistant SBR rubber
Outer finish : fine tape wrapped
Temperature : - 30°C to +70°C
Production lengths : 40, 60 metres
Colour : black
Marking : ref 223 - air comprimé 15 bar - production date

Possible end-fittings : male bsp taper, robur, cam-lock, weco
See also Ref 224

Hose RE 224 is without doubt one of the toughest hoses on the market.
Its inner tube is resistant to compressor oil and its outer cover is abrasion resistant.
It has an excellent life span.
Moreover, its heavy textile reinforcement and its superior thickness increase its mechanical resistance to traction, flexion and other constraints.

ISO 2398 Type 2B

Technical specifications :

Inner tube : oil resistant smooth SBR / NBR rubber
Reinforcement : textile plies
Outer cover : abrasion and weather resistant SBR rubber
Outer finish : fine tape wrapped
Temperature : -30° C to +70° C maximum
Production lengths : 60 metres, above diameter 100 : 20 metres
Colour : black
Marking : REF 224 - air comprimé 20 bar - date / batch N°

Possible end-fittings : male threaded, robur, cam-lock, weco
See also Ref 223, Ref 2011

Hose REF 234 is extruded.
It is used on worksites for air supply of air tools.
It can be produced in any inner diameter up to 25mm with various thicknesses.

Technical specifications :

Inner tube : EPDM rubber
Reinforcement : textile plies
Outer cover : EPDM rubber
Outer finish : smooth
Temperature : - 30°C to +70°C
Production lengths : 40 metres
Colour : black with blue stripes
Marking : REF 234 - RCMH - tuyau air/air hose - dia. - working pressure - batch N

Possible end-fittings : Express, coupling
See also Ref 221, Ref 222

Hose 254 is used for many fluids down to -54 ° C in continuous service.
Originally designed for low temperature air and nitrogen service application, it can likewise be used for many other fluids such as water, mineral oils and gas-oil and thus be considered a multiservice hose.
With great flexibility, it can be equipped with swaged fittings and also anti-whip cables or safety stockings.

Technical specifications :

Inner tube : black smooth oil, air, and gaz special resistant rubber designed for low temperatures.
Reinforcement : 2 high tensile synthetic textile layers.
Outer cover : black abrasion and weather special resistant rubber to low temperatures.
Outer finish : fine tape wrapped.
Temperature - 54°C to + 70° C.
Production lengths : 61 metres.
Marking : Tecalemit Flexibles - Air / water / Nitrogen special hose low temperature -54°C

Although extremely lightweight, hose REF 277 can accept high working pressures.
It is used for light compressed air service or wherever its weight and compact dimensions are the determinating factors.
Its outer cover and inner tube are produced with one single induction which interpenetrates the braiding, rendering ideal adherence between the layers.
The proportion of elastomer nitrile-pvc is 70/30%.
It benefits from the NSFS 61 112 approval for diameters 25, 45, 70 and 110.
Diameter 51, for severe applications, this hose is available with a greater thickness. It therefore has better abrasion resistance.
Ref 279 50 and Ref 280 50 with an operation pressure of 25 bars.

Technical specifications :

Inner tube : elastomer nitrile - PVC
Reinforcement : textile braid
Outer cover : abrasion and weather resistant nitrile - PVC
Outer finish : smooth with longitudinal ribs
Temperature : - 20°C to 70°C maximum
Production lengths : 20 and 40 metres, up to 200 metres to order
Colour : black for dia. 20, 25, 50, 75, 100 and 150
Marking : none

Possible end-fittings : Guillemin, Robur, Cam-lock
See also Ref 223

Hose type REF 299 is intended to convey hot compressed air exempt of oil.
It has excellent bend radius and resists shocks and mechanical strains.
It gives excellent results particularly in conveying pulverulents, for the compressed air connection between tank and tractor

Technical specifications :

Inner tube : black EPDM rubber
Reinforcement : metal spirals
Outer cover : black EPDM rubber
Outer finish : fine tape wrapped
Temperature : -50°C to +208°C
Production lengths : 61 metres
Colour : black with red stripe
Marking : Part N° - TECALEMIT - batch N°

Possible end-fittings : Guillemin, Storz, threaded