Types of inserts

These inserts are the most commonly used. The tail is long with pronounced barbs.
The latch area is simple, being comprised of a recess into which the forward part of the ferrule locks during swaging.
Types of TECALEMIT FLEXIBLES hydraulic hose concerned (see catalogue 777-200) :
- Textile-reinforced hose : T331, T610, T611, T622, T623
- Metal braided hose : T110, T111, T116, T117, VKI, T121, T210, T211,T221
- Metal spiral hose : T911, T912
- Thermoplastic textile-reinforced hose : T710, T810, TTA, TTK
- Thermoplastic metal-reinforced hose : T711

TYPE S SANS DENUDAGE etancheite raccord hydraulique Type "S"
without skiving
   
TYPE S DENUDAGE etancheite raccord hydraulique Type "S"
with external skiving

This range of inserts does not require internal skiving for very high pressure hoses.
External skiving is only required on diameters 1”1/4, 1”1/2, 2” (32, 38 and 50mm) on hose types T911, T915, T1310.
For hose type T912, no internal skiving is required whatever the diameter.
The tail is long with very pronounced barbs.
The latch area is very simple, comprised of a groove into which the forward part of the ferrule will lock.
Types of TECALEMIT FLEXIBLES hydraulic hose concerned (see catalogue 777-200) :
- 4 or 6 steel spiral reinforced hose : T911, T912, T915,T1310

TYPE SC SANS DENUDAGE etancheite raccord hydraulique Type "SC"
without external skiving
   
   
TYPE SC DENUDAGE etancheite raccord hydraulique Type "SC"
with external skiving

This range of fittings is exclusively designed for very high pressure applications as its assembly is quite complex, requiring both internal and external skiving.
The barbed tail is long with a profile commonly called “interlock”, the barbs have a fir-tree layout with a bulbous forward part designed to maintain the steel layers of the hose’s reinforcing structure.
The latch area is double : at the forward part of the ferrule, a recess into which the collar of the insert will lock and a bulbous ring inside the ferrule which compresses the reinforcing metal spirals into a corresponding depression on the insert.
Types of TECALEMIT FLEXIBLES hydraulic hose concerned (see catalogue 777-200) :
- 4 or 6 steel spiral reinforced hose : T912, T915, T1310

TYPE SD DENUDAGE etancheite raccord hydraulique Type "SD"
with internal and
external skive

These double-skive inserts are intended for TECALEMIT FLEXIBLES hoses designed for industrial cleaning by water blasting at very high pressures.
The barbed tail is long with a profile commonly called “interlock”, the barbs have a fir-tree layout with a bulbous forward part designed to maintain the steel layers of the hose’s reinforcing structure.
The latch area is double : at the forward part of the ferrule, a recess into which the collar of the insert will lock and a bulbous ring inside the ferrule which compresses the reinforcing metal spirals into a corresponding depression on the insert.
Types of TECALEMIT FLEXIBLES hydraulic hose concerned (see catalogue777-200) :
- 4 or 6 steel spiral reinforced hose : T961, T962, T1362

TYPE AQ etancheite raccord hydraulique Type "AQ"
with internal and
external skiving
certication AEO
Logo NF 377
Certifications DREAL
Certification Veritas
Rubber hoses
hydraulic hoses
hydraulic fittings
tubes pneumatiques