Home 
News
Catalogs
Fr
Tecalemit RCMH
Reinforcing sleeve & tube cutter for pneumatiques tubes
Reinforcing sleeves are also called bushes and allow the use of compression fittings on MANURIL® and MANUlan® tubes.
|
 |
 |
| Reinforcing sleeves (bushes) | |||||||||
| Part n° | Outer diameter (mm) D |
Tolerance on outer diameter |
Inner diameter (mm) I |
Tolerance on inner diameter |
Thickness (mm) E |
Collar diameter (mm) C |
Tolerance on collar diameter |
Length (mm) L |
Tolerance on length |
| 43700101 | 1,5 | +/-0,03 | 1 | +/-0,10 | 0,25 | 2,5 | +/-0,20 | 8 | +/-0,12 |
| 43700201 | 2 | +/-0,03 | 1,4 | +/-0,10 | 0,3 | 3,2 | +/-0,20 | 8 | +/-0,12 |
| 43700401 | 2,5 | +/-0,05 | 1,9 | +/-0,10 | 0,3 | 4 | +/-0,20 | 8 | +/-0,12 |
| 43700431 | 2,7 | +/-0,05 | 2,1 | +/-0,10 | 0,3 | 4,2 | +/-0,20 | 10 | +/-0,12 |
| 43701171 | 3 | +/-0,07 | 2,4 | +/-0,10 | 0,3 | 4,5 | +/-0,20 | 10 | +/-0,12 |
| 43702001 | 4 | +/-0,07 | 3,2 | +/-0,10 | 0,4 | 6 | +/-0,30 | 10 | +/-0,15 |
| 43703001 | 4,5 | +/-0,07 | 3,7 | +/-0,10 | 0,4 | 6,6 | +/-0,30 | 10 | +/-0,15 |
| 43704001 | 5 | +/-0,07 | 4,1 | +/-0,10 | 0,45 | 7,5 | +/-0,30 | 12 | +/-0,15 |
| 43705001 | 5,5 | +/-0,07 | 4,5 | +/-0,10 | 0,5 | 8,1 | +/-0,30 | 12 | +/-0,15 |
| 43703801 | 6 | +/-0,1 | 5,14 | +/-0,10 | 0,43 | 8 | +/-0,30 | 15 | +/-0,15 |
| 43703411 | 7,5 | +/-0,1 | 6,5 | +/-0,10 | 0,5 | 10 | +/-0,30 | 15 | +/-0,18 |
| 43704801 | 8 | +/-0,1 | 7 | +/-0,10 | 0,5 | 10 | +/-0,30 | 15 | +/-0,18 |
| 43707097 | 8,5 | +/-0,1 | 7,7 | +/-0,10 | 0,4 | 11 | +/-0,30 | 15 | +/-0,18 |
| 43705051 | 9 | +/-0,1 | 7,7 | +/-0,10 | 0,65 | 12 | +/-0,30 | 15 | +/-0,18 |
| 43705201 | 10 | +/-0,1 | 8,7 | +/-0,10 | 0,65 | 12 | +/-0,30 | 15 | +/-0,18 |
| 43700141 | 11 | +/-0,02 | 10 | +/-0,10 | 0,5 | 14 | +/-0,30 | 15 | +/-0,20 |
| 43700191 | 12 | +/-0,02 | 10,7 | +/-0,10 | 0,65 | 14 | +/-0,30 | 15 | +/-0,20 |
| 43705221 | 14 | +/-0,02 | 12,7 | +/-0,10 | 0,65 | 17,8 | +/-0,30 | 18 | +/-0,20 |
| 43705241 | 18 | +/-0,02 | 16,7 | +/-0,10 | 0,65 | 21,8 | +/-0,30 | 20 | +/-0,20 |
 |
The plastic tube cutter 28908631R is intended for cutting pneumatic tubes up to outer diameter 25 mm.
|
 |
The metallic Ref 28908631 is intended for cutting pneumatic tubes up to outer diameter 25 mm.
|
